Operation Manual – Port Basic ConfigurationH3C S7500 Series Ethernet Switches Chapter 1 Port Basic Configuration1-7To do… Use the command… RemarksEnable the hardwarespeedup function outsidethe portspeedup enableDisable the hardwarespeedup function outsidethe portspeedup disableOptionalBy default, the hardwarespeedup function outsidethe port is enabled.Caution:z The hardspeedup enable/disable commands are applicable to type-A LPUs only,including LS81FT48A, LS81FM24A, LS81FS24A, LS81GB8UA, and LS81GT8UA.z The speedup enable/disable commands are applicable to non-type-A LPUs only.z The commands above are diagnostic, so you cannot use them at discretion.1.1.9 Displaying and Maintaining Basic Port ConfigurationTo do… Use the command… RemarksDisplay port configurationinformationdisplay interface[ interface-type |interface-typeinterface-number ]Display the informationabout port loopbackdetectiondisplayloopback-detectionDisplay brief informationabout port configurationdisplay brief interface[ interface-typeinterface-number ] [ |{ begin | include |exclude } string ]Display the hybrid or trunkportsdisplay port { hybrid |trunk }Display port informationabout the specified unitdisplay unit unit-idinterfaceAvailable in any view.Clear port statisticsreset counters interface[ interface-type |interface-typeinterface-number ]Available in user view.After 802.1x is enabled ona port, statistics on theport cannot be cleared bythe command.
