Xerox DocuPrint 180 manuals
DocuPrint 180
Table of contents
DocuPrint 180
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- About this guide
- Conventions
- Internet Services (HTTP) Gateway Configuration
- IPP Gateway Configuration
- Simple Network Management Protocol (SNMP) Configuration
- Configuration variables
- Printer and job messages
- NDS Setup
- Backup
- Restore
- Backing up a System
- Restoring a System
- Access and Security
- Overview of Security
- User Password changes
- Security Setup
- Using the High security setting
- User and File-level changes
- Solaris file permissions secured
- Network parameters secured
- XDSS script components
- Remote shell internet service
- Print command line client from remote systems
- Other security tips
- Document and backup
- Quick reference
- Printing
- Enable/Disable FIFO Job Scheduling
- ASCII and PCL Printing Utility
- Set lp/lprcopycount utility
- Socket Gateway Configuration Utility: setVPSoption
- TIFF files
- Supported TIFF tags
- MICR Enablement
- Using VIPP
- Printing hints
- Finishing
- Creating jobs to use subset finishing
- PCL Offset/Separator/Subset Finishing command
- PCL Paper Source Command
- Additional finishing information
- Fonts
- Font download option
- Non Resident Fonts
- Font substitution
- Accounting and Billing
- Accounting file fields
- Billing
- Billing Meters
- Troubleshooting
- Printer fault
- Client problems
- DigiPath problems
- Print Quality problems
- Inoperable system problems
- Job Integrity problems
- TIFF problems
- Restore password
- Restart DocuSP software without rebooting
- Printing system logs
- ep_exception_log and ep_primary_log
- Printing the accounting log
- Loading XJDC/Unix
- Configuring XJDC/Unix
- Output files
- Properly ejecting a diskette from the Diskette drive on a DocuSP workstation
- Hints and Tips
- Color Systems
- Time required to print PDL
- Job submission order
DocuPrint 180
Table of contents
- Table Of Contents
- Overview
- Printing the user guides
- DocuSP 3.74.xx new features
- DocuTech/DocuPrint 75/90
- DocuColor printer specific changes
- page parallel rip
- Sun Blade 2500
- DocuSP 3.70/3.73 new features
- job forwarding
- reprint manager cd rom access
- pcl6 and pclxl
- pcl features and additions
- stock export change
- DocuColor 2045/2060, DocuColor 6060, and DocuColor iGen3 specific changes
- rgb profile changes
- LCDS
- copy sensitive cme support
- save job setup upon exit
- DocuSP 3.74 software release information
- DocuJob Converter
- SNMP
- Tools and utilities
- Reset the Xrite Spectrophotometer
- DocuSP Emergency Recovery Utility (DSPERU)
- required levels of expertise
- testing the backup tape
- activity logging
- checking the tape drive
- Resource Backup and Restore (RBR) utility
- helpful hints for using rbr
- sample resource backup and restore scripts
- sample resource restore script
- adobe acrobat reader
DocuPrint 180
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Glossary
- PDL principles and procedures
- Enabling PDL features and functions
- PDL command structure and components
- Command syntax
- Command syntax conventions
- Sample PDL commands
- PDL command categories
- The Job Source Library (JSL)
- What does a JSL specify?
- JDL name
- Coding other system level commands
- Catalog level commands
- Coding job or JDE level commands
- Comments
- Sample completed JSL
- Before creating a JSL: considerations and decisions
- Input data
- Special features
- Interactions between JSLs, catalogs, and jobs
- Orientation
- Fonts
- Overriding PDL commands
- Hints and tips
- Coding a JSL
- Before you start
- Full JSL coding procedure
- Sample online JSL
- Sample offline JSL
- Compiling a JSL
- Files produced by the compilation procedure
- Correcting errors in a JSL
- Dynamic job descriptor entries (DJDEs)
- Dumps
- Offline dump
- Compatibility with other Xerox laser printing systems that use PDL
- systems
- Other Xerox monochrome LPS jobs
- Input data streams
- Input processing functions
- processing
- Example of an online JSL
- Input processing offline
- Tape codes
- Record structure
- Input processing command descriptions
- BLOCK command
- BLOCK ADJUST
- BLOCK FORMAT
- BLOCK LMULT
- BLOCK OFFSET
- BLOCK PREAMBLE
- BLOCK command: points to note
- CODE command
- CODE ASSIGN
- CODE SPACECODE
- DBCODE command parameters
- DBCODE DEFAULT
- IDEN command parameters
- IDEN OFFSET
- IDEN PREFIX
- IDEN command example
- KCODE ASSIGN
- KCODE command: point to note
- PCC ADVTAPE
- PCC DEFAULT
- PCC INITIAL
- PCC MASK
- Record command parameters
- RECORD CONSTANT
- RECORD LENGTH
- RECORD LMULT
- RECORD OFFSET
- RECORD command: Points to note
- RECORD command example
- SEFFNT command
- SEFFNT command parameters
- SEFFNT MAP
- SEFFNT command: points to note
- SEFFNT command examples
- TCODE command
- TCODE command parameters
- TCODE DEFAULT
- TCODE TRESET
- TCODE command examples
- VOLUME command parameters
- VOLUME BMULT
- VOLUME DBCODE
- VOLUME DBCS
- VOLUME EOV
- VOLUME HOST
- VOLUME KANJI
- VOLUME KCODE
- VOLUME LCODE
- VOLUME MAXLAB
- VOLUME OPTIMIZE
- VOLUME OSCHN
- VOLUME RMULT
- VOLUME UNPACK
- VOLUME VCODE
- VOLUME command examples
- Using logical processing
- Test expressions
- Logical processing commands that have TEST parameters
- TABLE command parameters
- TABLE MASK
- TABLE command: points to note
- CRITERIA command modes
- Using the CRITERIA command
- String comparisons
- CRITERIA command parameters
- CRITERIA CONSTANT
- CRITERIA LINENUM
- CRITERIA VALUE
- Logical processing command descriptions
- BANNER command parameters
- BANNER HJOBNO
- BANNER TCOUNT
- BANNER TYPE
- BANNER command: points to note
- BSELECT and BDELETE TEST parameter
- BSELECT and BDELETE commands: points to note
- Example 2
- LMODIFY command
- LMODIFY SELECT
- Points to note: LMODIFY command
- RAUX TEST parameter
- RDELETE and RSELECT commands
- RDELETE and RSELECT commands: point to note
- RFEED command
- RFEED command: points to note
- ROFFSET command
- ROFFSET command parameters
- ROFFSET TEST
- ROFFSET command example
- RPAGE command
- RPAGE TEST
- RPAGE command: points to note
- RRESUME and RSUSPEND commands
- RSUSPEND and RRESUME TEST
- RSUSPEND and RRESUME example
- RSTACK command
- Delimiter on accounting page
- RSTACK command parameters
- RSTACK DELIMITER
- RSTACK PRINT
- RSTACK TEST
- RSTACK command example
- Specifying print format parameters
- ABNORMAL command parameters
- ABNORMAL CODE
- ABNORMAL IMISMATCH
- ABNORMAL ISUBSTITUTE
- ABNORMAL REP
- ABNORMAL SECURITY
- ACCT command parameters
- ACCT USER
- CME command
- CME command parameters
- CME CONSTANT
- CME LINE
- CME POSITION
- CME command examples
- IDR command
- IDR command parameters
- IDR ILIST
- IDR PALETTE
- LINE BASELINE
- LINE BLANKTYPE
- LINE DATA
- LINE FDATA
- LINE FONTINDEX
- LINE GDATA
- LINE INKINDEX
- LINE LPI
- LINE MARGIN
- LINE PCC
- LINE PCCTYPE
- LINE VFU
- LINE command: points to note
- LINE command examples
- MESSAGE command
- MESSAGE command parameters
- MESSAGE OTEXT
- MESSAGE command: points to note
- OUTPUT command parameters
- OUTPUT BFORM
- OUTPUT BINDING
- OUTPUT COLLATE
- OUTPUT COVER
- OUTPUT DENSITY
- OUTPUT DUPLEX
- OUTPUT FEED
- OUTPUT FORMAT
- OUTPUT FORMS
- OUTPUT GRAPHICS
- OUTPUT IDFAULT
- OUTPUT IDR
- OUTPUT IMAGE
- OUTPUT INVERT
- OUTPUT IRESULT
- OUTPUT LOGO
- OUTPUT MODIFY
- OUTPUT NTO1
- OUTPUT NUMBER
- OUTPUT OFFSET
- OUTPUT OSTK
- OUTPUT PAPERSIZE
- OUTPUT PURGE
- OUTPUT SF1FUNCTION
- OUTPUT SF2FUNCTION
- OUTPUT SIZING
- OUTPUT STAPLE
- OUTPUT STOCKS
- OUTPUT SYSPPR
- OUTPUT TMODE
- OUTPUT TRANS
- OUTPUT XSHIFT
- OUTPUT command: point to note
- Standard PDEs
- PDE command parameters
- PDE FONTS
- PDE PMODE
- PDE command: points to note
- ROUTE command parameters
- ROUTE RFORM
- ROUTE command example
- STOCKSET command parameters
- STOCKSET INIFEED
- STOCKSET command example
- VFU command parameters
- VFU command: points to note
- VFU command example
- Using Dynamic Job Descriptor Entries (DJDEs)
- Specifying DJDE records
- Application of DJDEs
- DJDE operator information pages
- Restrictions on job parameter modification
- Considerations and cautions for using DJDEs
- Types of DJDEs
- ALTER DJDE
- ALTER DJDE: point to note
- ASSIGN DJDE
- BATCH DJDE: points to note
- BEGIN DJDE: points to note
- BFORM DJDE: points to note
- BOF DJDE
- C (text) DJDE: points to note
- COLLATE DJDE
- COPIES DJDE: points to note
- DEPT DJDE
- DESTINATION DJDE: points to note
- END DJDE
- FEED DJDE
- FILE DJDE
- FILE DJDE: points to note
- FONTINDEX DJDE
- FONTINDEX DJDE: points to note
- FONTS DJDE
- FONTS DJDE: points to note
- FORMAT DJDE
- FORM[S] DJDE
- GDATA DJDE
- GRAPHIC DJDE: points to note
- ICATALOG DJDE
- IDFAULT DJDE: point to note
- ILIST DJDE example
- INKINDEX DJDE
- INVERT DJDE
- IRESULT DJDE
- ITEXT DJDE
- JDE DJDE: points to note
- JDL DJDE: points to note
- LOGO DJDE: points to note
- LPI DJDE: point to note
- MARGIN DJDE: points to note
- MODIFY DJDE: points to note
- NUMBER DJDE: point to note
- NUMBER DJDE example
- OTEXT DJDE: point to note
- OVERPRINT DJDE: points to note
- PALETTE DJDE example
- RFORM DJDE: points to note
- RTEXT DJDE example
- SAVE DJDE
- SEFMAP DJDE: points to note
- SF1FUNCTION DJDE
- SF2FUNCTION DJDE
- SHIFT DJDE: points to note
- SIDE DJDE: points to note
- STOCKS DJDE
- TOF DJDE
- TRANS DJDE
- XMP DJDE
- XSHIFT DJDE
- Using PDL commands for graphics
- Input for graphics
- Error handling for graphics
- Formats for graphic data
- Impact of graphics on system performance
- A. PDL command and DJDE summary
- Summary table of PDL commands and DJDEs
- B. PDL command quick reference
- PDL command Quick Reference table
- C. Character code assignments
- IBM BCD code set
- Honeywell/Bull 6000 BCD code set
- UNIVAC ASCII character set
- Standard ASCII character set
- Standard EBCDIC character set
- Xerox EBCDIC to extended ASCII hexadecimal translation values
- D. Offline specifications
- Valid host computer and label specifications
- Host system JDLs on system software CD
- LPS tape label format
DocuPrint 180
Table of contents
- related publications
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- about the reference set
- Print Description Language (PDL)
- Overview
- LPS component types
- LPS software components
- PDL related programs and tasks
- Report task (RPT)
- Preparing for a print job
- Job flow process
- Output processing
- Input data types
- Formatted data
- Purpose of PDL
- PDL command structure
- Identifier
- Parameter
- Syntax rules
- Right-part constants
- Job source library (JSL) structure
- ID level
- Job or JDE level
- Creating separate files for grouping PDL commands
- Non-JDL hierarchy — START command
- What your JSL specified for LPS processing
- Decisions to make before creating your JSL
- Output specifications
- Special features
- Command levels
- Command keywords
- PDL syntax
- hints and tips
- Using the Editor
- Setting up input parameters
- Specifying use of DJDEs
- Using copy modification entries
- Specifying output requirements
- Finished JSL
- Paper sizes
- Edgemarking
- page orientation
- Landscape orientation
- Portrait orientation
- registration shift and skew
- Font and graphic memory
- DocuPrint 180 compatibility with the 4850, 4135, 4635 and 4050/4090/4650 LPS
- Xerox 4850 and 4890 HighLight Color LPS
- Downloading 4850/4890 LPS applications to your DocuPrint 180 LPS
- Points to note
- Specifying input parameters
- BLOCK command
- CONSTANT
- LENGTH
- LTHFLD
- POSTAMBLE
- ZERO
- Online versus offline JDLs
- CODE command
- DEFAULT
- Examples
- PCC command
- ASSIGN
- INITIAL
- Example
- ADJUST
- FORMAT
- LMULT
- OFFSET
- PREAMBLE
- STRUCTURE
- seffnt command
- Mapping files
- label:] SEFFNT SEFMAP
- tcode command
- TASSIGN
- TRESET
- volume command
- BMULT
- HOST
- LCODE
- LPACK
- MINLAB
- OPTIMIZE
- OSCHN
- OSTLP
- RMULT
- TCODE
- UNPACK
- Input sources
- Online-specific commands
- DJDE processing
- Universal character set buffers (UCSBs)
- Forms control buffer (FCB)
- Online record length
- Online recovery
- Online dump
- Downloading files from the host to the LPS
- Valid download file types
- Offline mode
- Packed data formats
- Multivolume processing
- Defining clusters
- What clusters do for the programmer and operator
- Simple and OTEXT applications
- Stockset applications
- PDL commands
- Steps for creating clusters
- Keeping stockset changes to a minimum
- abnormal command
- ERROR
- ISUBSTITUTE
- OTEXT
- SECURITY
- Marker page
- Accounting data on report basis
- Installation accounting report
- DEPT
- Short form CME specifications
- Cataloged CMEs
- FONTS
- LINE
- POSITION
- Example 1
- EXPORT command
- SEPARATORS
- SNUMBER
- SPLIT
- SRECOVER
- LINE command
- DATA
- FONTINDEX
- MARGIN
- OVERPRINT
- PCCTYPE
- UCSB
- Example 2
- Example 3
- MESSAGE command
- ITEXT
- BTEXT
- BTEXT parameter rules
- Maximizing with minimal effort
- Other Audit Logging points to note
- OUTPUT
- BFORM
- COLLATE
- COVER
- CYCLEFORMS
- DENSITY
- DUPLEX
- FEED
- FORMS
- GRAPHICS
- IMAGE
- INVERT
- MODIFY
- NTO1
- NUMBER
- OSTK
- PAPERSIZE
- PURGE
- SF1FUNCTION
- SHIFT
- SIZING
- STOCKS
- SYSPPR
- TMODE
- TRANS
- XSHIFT
- Points to note — OUTPUT command
- Example 4
- Example 5
- PDE command
- Multiple logical pages on a physical page
- BEGIN
- PMODE
- ROUTE command
- RFORM
- RTEXT
- STOCKSET command
- INIFEED
- Using logical processing
- Logical processing command format
- CRITERIA command
- CHANGE
- LINENUM
- Test expressions
- Constant mode
- Combining change and constant modes
- String comparisons
- Masked comparisons using default type assignments
- banner command
- HCOUNT
- HRPTNA
- TEST
- TEST—BSELECT and BDELETE commands
- PASSES
- rpage command
- SIDE
- WHEN
- RSTACK delimiter modes
- Delimiter display
- ACCTINFO
- DELIMITER
- MASK
- benefits of using djdes
- Page-oriented
- Record-oriented
- IDEN command
- OPRINFO
- SKIP
- application of djdes
- djde operator information pages
- COPIES=processing
- ALTER
- BSEQ
- BSKIP
- BATCH
- Parameter rules
- CANCEL
- COPIES
- DESTINATION
- FILE
- SAVE
- SEFMAP
- SF2FUNCTION
- STIMING
- File effectiveness
- Card-image file processing
- LPS-labeled file processing
- Delimited records for LPS-labeled files
- using graphics
- Random mode
- Block mode
- Document interleaved
- Batch mode
- Noninterleaved
- Document interleaved graphic file transfers
- Online
- Graphic feature restrictions
- standard ascii character set
DocuPrint 180
Table of contents
- laser safety
- Table Of Contents
- Table Of Contents
- about this guide
- Printer Controller
- System overview
- Printer Controller software and fonts
- DocuPrint Dual Mode
- Client workstations and system software
- Ethernet LAN
- Multiple network connectivity
- Printer Controller overview
- Printer Controller components
- printer controller software and fonts
- Printers
- Printer configurations
- Optional printer components
- Input enablement device
- Client workstations
- Communicating with the network
- Job status feedback
- paper and other throughput stocks
- paper width and printer performance
- paper care
- Developer A
- cartridge tapes
- MICR comparator A
- consumable supplies tables
- INDEX
- complete supplies list—96/4635/180 printers
- ordering supplies
DocuPrint 180
Table of contents
- Table Of Contents
- about this guide
- P RODUCT O VERVIEW
- Install Planning
- Electrical Requirements
- Environmental Requirements
- Floor Load
- Unique Features Set
- Xerox DocuTech 61xx
- Limitations
- Productivity Guide
- Xerox DocuTech 1xx HighLight Color (HLC)
- System Dependencies and Prerequisites
- Configuration Guide
- Xerox DocuPrint 1xx
- Performance Specifications (DP180 with XSIS kit)
- Xerox iGen3 Digital Production Pres
- Performance Specifications
- C USTOMER A GREEMENT
DocuPrint 180
Table of contents
- Table Of Contents
- Table Of Contents
- System overview
- Operating system software
- IBM hosts supported
- Data streams supported
- Differences in supported software features
- Components of the NPS/IPS Extension
- Installation planning
- DocuPrint IPS Extension
- Installation process
- Changing print modes
- Changing from NPS/IPS print mode to EPS print mode
- Problem solving
DocuPrint 180
Table of contents
- Table Of Contents
- Table Of Contents
- Features and capabilities
- Functional overview
- Tape job accounting
- Job recovery
- Input processing from tape using Print Description Language
- Record structure
- Managing and printing jobs from the Tape Client
- Preparing to print a tape job
- Specifying files for printing
- Specifying the JDL, JDE, and form to start a job
- Controlling input for tape jobs
- Moving over blocks on a tape
- Starting and ending tape dump sessions
- Managing the Tape Client
- Adding a printer
- Modifying a printer
- Managing the tape drive
- Managing the tape job accounting log
DocuPrint 180
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Overview
- Host connectivity options
- Data formats supported
- Stock sizes
- Paper weights
- General paper characteristics to look for
- Printing process and job flow
- Printer overview
- Printer components
- Printer control console
- Sample tray
- Feeder trays
- Stacker bins
- Feeder/stacker modules
- Printer configurations
- Printer options
- Support and interface with feeders
- by 10 inch enablement kit
- Bypass transport paper path
- Controller overview
- Sun Blade workstation
- External components and options
- Controller stand
- Tape drives overview
- Paper sizing and print speed
- Paper width and throughput speed (LCDS printing only)
- Paper size and pitch mode minimum and maximum
- Feed direction for standard paper sizes
- Managing the printer
- Powering off the printer immediately
- Loading paper
- Unloading a stacker bin
- Managing the system
- Powering on the printer
- Rebooting the system (warm boot)
- Performing an immediate shutdown and reboot
- Powering off the system
- Performing an emergency power off
- Powering off the printer
- Operating the 18/36 track tape drive
- Powering off the tape drive
- Placing the tape drive online
- Unloading a tape
- Setting file protection
- Printing the online Help documentation
- cleaning the system and its components
- Cleaning the Q1107 sensor
- Cleaning the Q1164 sensor
- Cleaning the exterior surfaces of the system
- Troubleshooting
- Solving Macintosh problems
- Troubleshooting Graphical User Interface (GUI) problems
- Troubleshooting print quality problems
- Resolving font problems
- Troubleshooting an inoperable system
- Troubleshooting job integrity problems
- Isolating PostScript file problems
- Isolating TIFF file problems
- Isolating PDF file problems
- Troubleshooting process problems
- Troubleshooting problems with saving jobs
- Crash recovery
- UI recovery messages
- Spooling mode
- Clearing online print data
- Online gateway faults
- Data type on the Online Manager window
- Incorrect printer state on host
- Aids to paper jam clearance
- Clearing paper jams in all printer areas
- Checking job integrity following a paper jam
- Clearing a paper jam in the bypass transport
- Clearing a misfeed (feeder tray fault)
- Troubleshooting frequent misfeeds (processor feeder trays)
- Incorrect paper size message
- Generating a test page
- Troubleshooting stacker problems
- available supplies
DocuPrint 180
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- laser safety
- related publications
- PDL principles and procedures
- Enabling PDL features and functions
- PDL command structure and components
- Command syntax
- Command syntax conventions
- Sample PDL commands
- PDL command categories
- The Job Source Library (JSL)
- What does a JSL specify?
- JDL or system level commands
- Coding other system level commands
- Catalog level commands
- Coding job or JDE level commands
- Comments
- Sample completed JSL
- Before creating a JSL: considerations and decisions
- Input data
- Special features
- Interactions between JSLs, catalogs, and jobs
- Orientation
- Fonts
- Overriding PDL commands
- Hints and tips
- Coding a JSL
- Short JSL coding procedure
- Full JSL coding procedure
- Sample online JSL
- Sample offline JSL
- Compiling a JSL
- Files produced by the compilation procedure
- Correcting errors in a JSL
- Dynamic job descriptor entries (DJDEs)
- Dumps
- Offline dump
- Compatibility with other Xerox laser printing systems that use PDL
- Printing highlight color applications on DP EPS
- Other Xerox monochrome LPS jobs
- Specifying input parameters
- Input processing functions
- processing
- Example of an online JSL
- Input processing offline
- Tape codes
- Record structure
- Input processing command descriptions
- BLOCK command
- BLOCK ADJUST
- BLOCK FORMAT
- BLOCK LMULT
- BLOCK OFFSET
- BLOCK PREAMBLE
- BLOCK command: points to note
- CODE command
- CODE ASSIGN
- CODE SPACECODE
- DBCODE command parameters
- DBCODE DEFAULT
- IDEN command parameters
- IDEN OFFSET
- IDEN PREFIX
- IDEN command example
- KCODE ASSIGN
- KCODE command: point to note
- PCC ADVTAPE
- PCC DEFAULT
- PCC INITIAL
- PCC MASK
- RECORD command
- RECORD CONSTANT
- RECORD LENGTH
- RECORD LMULT
- RECORD OFFSET
- RECORD command: Points to note
- RECORD command example
- SEFFNT command
- SEFFNT command parameters
- SEFFNT MAP
- SEFFNT command: points to note
- SEFFNT command examples
- TCODE command
- TCODE command parameters
- TCODE DEFAULT
- TCODE TRESET
- TCODE command examples
- VOLUME command
- VOLUME BMULT
- VOLUME DBCODE
- VOLUME EMTYPE
- VOLUME EXPAGE
- VOLUME HOST
- VOLUME KANJI
- VOLUME KCODE
- VOLUME LCODE
- VOLUME MAXLAB
- VOLUME OPTIMIZE
- VOLUME OSCHN
- VOLUME RMULT
- VOLUME UNPACK
- VOLUME VCODE
- VOLUME command examples
- Using logical processing
- Test expressions
- Logical processing commands that have TEST parameters
- TABLE command parameters
- TABLE MASK
- TABLE command: points to note
- CRITERIA command
- Using the CRITERIA command
- String comparisons
- CRITERIA command parameters
- CRITERIA CONSTANT
- CRITERIA LINENUM
- CRITERIA VALUE
- Logical processing command descriptions
- BANNER command parameters
- BANNER HJOBNO
- BANNER TCOUNT
- BANNER TYPE
- BANNER command: points to note
- BSELECT and BDELETE commands
- BSELECT and BDELETE commands: points to note
- Example 2
- LMODIFY command
- LMODIFY SELECT
- Points to note: LMODIFY command
- RAUX TEST parameter
- RDELETE and RSELECT commands
- RDELETE and RSELECT commands: point to note
- RFEED command
- RFEED command: points to note
- ROFFSET command
- ROFFSET command parameters
- ROFFSET TEST
- ROFFSET command example
- RPAGE command
- RPAGE TEST
- RPAGE command: points to note
- RRESUME and RSUSPEND commands
- RSUSPEND and RRESUME TEST
- RSUSPEND and RRESUME example
- RSTACK command
- Delimiter on accounting page
- RSTACK command parameters
- RSTACK DELIMITER
- RSTACK PRINT
- RSTACK TEST
- RSTACK command example
- Specifying print format parameters
- ABNORMAL command
- ABNORMAL CODE
- ABNORMAL IMISMATCH
- ABNORMAL ISUBSTITUTE
- ABNORMAL REP
- ABNORMAL SECURITY
- ACCT command
- ACCT USER
- CME command
- CME command parameters
- CME CONSTANT
- CME LINE
- CME POSITION
- CME command examples
- IDR command
- IDR command parameters
- IDR ILIST
- IDR PALETTE
- LINE BASELINE
- LINE BLANKTYPE
- LINE DATA
- LINE FDATA
- LINE FONTINDEX
- LINE GDATA
- LINE INKINDEX
- LINE LPI
- LINE MARGIN
- LINE PCC
- LINE PCCTYPE
- LINE VFU
- LINE command: points to note
- LINE command examples
- MESSAGE command
- MESSAGE command parameters
- MESSAGE OTEXT
- MESSAGE command: points to note
- OUTPUT command
- OUTPUT BFORM
- OUTPUT BINDING
- OUTPUT COLLATE
- OUTPUT COVER
- OUTPUT DENSITY
- OUTPUT DUPLEX
- OUTPUT FEED
- OUTPUT FORMAT
- OUTPUT FORMS
- OUTPUT GRAPHICS
- OUTPUT IDFAULT
- OUTPUT IDR
- OUTPUT IMAGE
- OUTPUT INVERT
- OUTPUT IRESULT
- OUTPUT LOGO
- OUTPUT MODIFY
- OUTPUT NTO1
- OUTPUT NUMBER
- OUTPUT OFFSET
- OUTPUT OSTK
- OUTPUT PAPERSIZE
- OUTPUT PURGE
- OUTPUT SF1FUNCTION
- OUTPUT SF2FUNCTION
- OUTPUT SIZING
- OUTPUT STAPLE
- OUTPUT STOCKS
- OUTPUT SYSPPR
- OUTPUT TMODE
- OUTPUT TRANS
- OUTPUT XSHIFT
- OUTPUT command: point to note
- PDE command
- PDE command parameters
- PDE FONTS
- PDE PMODE
- PDE command: points to note
- ROUTE command
- ROUTE RFORM
- ROUTE command example
- STOCKSET command parameters
- STOCKSET INIFEED
- STOCKSET command example
- VFU command
- VFU command: points to note
- VFU command example
- Using Dynamic Job Descriptor Entries (DJDEs)
- Specifying DJDE records
- Application of DJDEs
- DJDE operator information pages
- Restrictions on job parameter modification
- Considerations and cautions for using DJDEs
- Types of DJDEs
- DJDE descriptions
- ALTER DJDE: point to note
- ASSIGN DJDE
- BATCH DJDE: points to note
- BEGIN DJDE: points to note
- BFORM DJDE: points to note
- BOF DJDE
- C (text) DJDE: points to note
- COLLATE DJDE
- COPIES DJDE: points to note
- DEPT DJDE
- DESTINATION DJDE: points to note
- END DJDE
- FEED DJDE
- FILE DJDE
- FILE DJDE: points to note
- FONTINDEX DJDE
- FONTINDEX DJDE: points to note
- FONTS DJDE
- FONTS DJDE: points to note
- FORMAT DJDE
- FORM[S] DJDE
- GDATA DJDE
- GRAPHIC DJDE: points to note
- ICATALOG DJDE
- IDFAULT DJDE: point to note
- ILIST DJDE example
- INKINDEX DJDE
- INVERT DJDE
- IRESULT DJDE
- ITEXT DJDE
- JDE DJDE: points to note
- JDL DJDE: points to note
- LOGO DJDE: points to note
- LPI DJDE: point to note
- MARGIN DJDE: points to note
- MODIFY DJDE: points to note
- NUMBER DJDE: point to note
- NUMBER DJDE example
- OTEXT DJDE: point to note
- OVERPRINT DJDE: points to note
- PALETTE DJDE example
- RFORM DJDE: points to note
- RTEXT DJDE example
- SAVE DJDE
- SEFMAP DJDE: points to note
- SF1FUNCTION DJDE
- SF2FUNCTION DJDE
- SHIFT DJDE: points to note
- SIDE DJDE: points to note
- STOCKS DJDE
- TOF DJDE
- TRANS DJDE
- XMP DJDE
- Using PDL commands for graphics
- Input for graphics
- Error handling for graphics
- Formats for graphic data
- Impact of graphics on system performance
- standard ascii character set
DocuPrint 180
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Glossary
- Product overview
- System components
- Client workstations and system software
- Client networking software
- MICR fonts
- Unsupported features
- Host connectivity options
- Controller components and options
- Controller components
- Controller interface options
- Printer components and options
- Printer control console
- Printer configurations
- Bypass transport option
- Roll feeder support (DP155 and DP180 EPS only)
- Preparing for installation
- Xerox responsibilities
- Routine maintenance
- Installation planning checklist
- Connectivity requirements
- Token Ring specifications
- Controller requirements and specifications
- Outlet configurations
- Environmental specifications
- Sun Blade 1000/2000 environmental requirements
- Controller placement
- Controller hardware specifications and requirements summary
- Printer requirements and specifications
- Hz printer outlet voltages
- Space requirements
- Printer configuration diagrams
- Bypass transport specifications
- Configuration diagrams with bypass transport
- Space planning guidelines
- Clearance space requirements
- Shared space configuration diagrams
- Floor leveling
- Turning radius
- Printer hardware specifications and requirements summary
- Space planning templates
- system connections
- Cable locations
- Channel attachments
- Installation process
- Defining the printer to the host
- A. Supplies
- Paper sizing and print speed
- Paper width and throughput speed (LCDS printing only)
- Paper size and pitch mode minimum and maximum
- Feed direction for standard paper sizes
- Paper care
- Other supplies
- Fuser agent
- Stacker containers and pallets (optional)
- MICR tools
- Consumable supplies tables
- Complete supplies list for the printer
- Ordering supplies
- B. Xerox support services
- Xerox Printing Systems Customer Support Center (U. S.)
- Xerox Documentation and Software Services (U. S.)
- Xerox Customer Documentation Catalog
- Xerox Font Services
- C. Related publications
- NPS/IPS publications
- Printing the customer documentation
DocuPrint 180
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Printer components and options
- related publications
- System overview
- Throughput speed
- System components overview
- NPS/IPS concurrent printing
- IPP support
- Software license
- Printer controller overview
- Printer controller components
- Sun Ultra 60 workstation
- Printer controller software and fonts
- Printer configurations
- Paper paths
- Network printing environment
- Client software
- Communicating with the network
- Job status feedback
- Ethernet LAN
- Multiple network connectivity
- IPDS printing environment
- Channel interface —channel-attached systems only
- Host Channel Unit (HCU)—channel-attached systems only
- IPDS data stream
- Software features for IPDS
- Color image support
- Magnetic ink character recognition (MICR)
- MICR output
- Verifying MICR output with the MICR comparator
- A. Supplies
- Paper width and printer performance
- Paper care
- Other supplies
- Fuser agent
- Developer
- Fonts
- MICR Positioning and Dimension Gauge
- Consumable supplies tables
- Complete supplies list—96/4635/180 printers
- Ordering supplies
- Supplies checklist
- B. Paper performance guidelines
DocuPrint 180
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Printer components and options
- System overview
- Throughput speed
- System components overview
- NPS/IPS concurrent printing
- Connectivity configurations
- Printer configurations
- channel-attached systems only
- Host Channel Unit (HCU)—channel-attached systems only
- Network PDL printing environment
- Networks
- Network client components
- Client networking software
- Sixth Sense
- Controller components and options
- Sun Ultra 60 workstation
- Printer controller software and fonts
- printer components and options
- Paper paths
- Installation
- Preparing for installation
- Customer responsibilities
- Routine maintenance
- Installation planning checklist
- NPS/IPS network installation checklist
- Novell network information
- DocuPrint NPS/IPS as a remote printer (RPRINTER)
- Connectivity requirements
- Token Ring specifications
- Controller specifications and requirements
- Outlet configurations
- Environmental specifications
- Controller hardware specifications and requirements summary
- Printer specifications and requirements
- Printer outlet voltages—60 Hz
- Printer outlet voltages—50 Hz
- Space requirements
- Printer placement
- Bypass transport specifications
- Configuration diagrams with bypass transport
- Space planning guidelines
- Clearance space requirements
- Floor leveling
- Turning radius
- Printer hardware specifications and requirements summary
- Space planning templates
- system connections
- Cable locations
- Your responsibilities
- Defining the IPS printer to the host
- Software licensing
- A. Supplies
- Paper width and printer performance
- Paper care
- Other supplies
- Fuser agent
- Cartridge tapes
- MICR tools
- Consumable supplies tables
- Complete supplies list—96/4635/180 printers
- Ordering supplies
- B. Xerox support services
- Xerox Printing Systems Customer Support Center
- Xerox Customer Documentation Catalog
- Operator training
- Xerox Font Center
- C. Related publications
- IBM reference manuals
- D. DocuPrint NPS/IPS on a Novell network
- Queue to printer relationships
- Print server (PSERVER)
- Job parameters
- Remote printer (RPRINTER)
- Novell configuration
- Configuring DocuPrint as an RPRINTER
- Supporting DocuPrint NPS/IPS on the file server
- E. Defining the channel-attached printer to the host
- Infoprint Manager procedures for Windows NT and Windows 2000
- Infoprint Manager procedures for AIX
- VM sample definitions
- VSE sample definitions
- F. Defining the printer to the host: TCP/IP attachment
- Configuration steps – MVS
- Correcting for printer performance issues – MVS
- References – MVS
- AS/400 parameters
- Configuration steps – AS/400
- Correcting for printer performance issues – AS/400
- Glossary
DocuPrint 180
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- non-default DC
- List Virtual Printers PJ
- AFP data flows IS 10-1–IS
- accessing commands CM
- overview IS
- order PJ
- form samples CM
- overview SJ
- site files CM
- Windows NT 4.0 SJ
- network IP
- diskettes IP A-13, IP A-22, SO A-14, SO
- listing files on CM
- fonts CM
- storing files DC
- overview DC
- Windows DC
DocuPrint 180
Table of contents
- related publications
- Table Of Contents
- Table Of Contents
- Table Of Contents
- xerox docuprint 180 lps product guide
- about the reference set
- document conventions
- floppy disk drive
- bypass transport
- docuprint 180 lps connection
- xerox docuprint 180 lps specifications
- clearance requirements
- electrical requirements
- xerox docuprint 180 lps features
- basic concepts
- system controller
- Printer
- Output subsystem
- Types of data
- Special processing
- Job source library (JSL) files
- Fonts
- Xerox DocuPrint 180 LPS hardware components
- System controller hardware components
- Printer hardware components
- Attention light
- Attention alarm
- components
- Operating System Software functional description
- Printer Software
- Optional host-resident software packages
- DocuPrint 180 LPS compatibility and comparison
- Product differences/user considerations
- Using your Xerox DocuPrint 180 LPS as a backup LPS
- Checking paper sizes and special stocks
- Comparing DocuPrint 180 LPS print job resolution
- Checking JDL compatibility
- Checking PDL compatibility
- DocuPrint 180 LPS comparison
- Xerox DocuPrint 180 LPS user considerations
- Registration shift and skew
- Paper size
- System page size
- Print Darkness
- Switching paper size and feed modes
- Cleaning time between pitch mode changes
- xerox support services
- Xerox Customer Support Center
- Customer Service Support Center
- Xerox Connection
- Xerox Documentation and Software Services
- Xerox Supplies Order Service
DocuPrint 180
Table of contents
- related publications
- Table Of Contents
- Sysgen overview
- xerox docuprint 180 laser printing system document set
- GLOSSARY
- document conventions
- sysgen overview
- Resource and information checklist
- sysgen commands
- Sysgen commands
- Entering and abbreviating commands
- Sample system configurations
- Configuration menu
- Additional sysgen parameters
- Precautions
- Installing and upgrading System UI software
- Installing or upgrading System UI dialog
- Performing a full sysgen
- Full sysgen procedure summary
- Performing an offline update sysgen
- Steps to perform an offline update sysgen using the AUTO command
- Steps to perform an offline update sysgen using the SYSGEN command
- Performing an online update sysgen
- Steps to perform an online update sysgen
- INDEX
DocuPrint 180
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- about this guide
- System safety
- Ozone safety
- European Union declaration of conformity
- Electricity at Work Regulation - UK
- Check your understanding
- Additional queries
- Electronic reprographics process
- Optional Components
- Paper weights
- General paper characteristics
- System software and job flow
- Printer overview
- High volume printer
- Production publisher
- The System
- Paper sizing and print speed
- Cleaning and maintenance overview
- Finisher precaution
- Paper
- Conditioning paper
- Paper curl
- Adding paper to tray 1 or
- Using the custom transfer assist blade
- Adjusting for paper curl
- Adjusting the decurler lever
- Maintaining the printer
- Replacing the highlight color container
- Changing the highlight color Customer Changeable Units
- Adding fuser shield
- Waste containers
- Wire Module Removal and Replacement
- Cleaning the 18/36-track cartridge tape drive
- Cleaning the 26-track cartridge tape drive
- Cleaning the sensors and the reflecting surfaces
- Cleaning the Q1011/1009 sensor and mirror
- Cleaning the Q1107 sensor
- Cleaning the Q1164 sensor
- Cleaning the display
- Clearing or cleaning the finisher sensors
- Clearing the Q1202 and Q1203 sensors
- Cleaning the Q1222 and Q1210 sensors
- Clearing the Q1205, Q1206, and Q1207 sensors
- Clearing the Q1213 sensor
- Clearing the Q1221, Q1218, and Q1227 sensors
- Cleaning the binder
- Cleaning the binder tape guides
- Cleaning the flappers
- Cleaning the calipers
- Closing the binder
- Storing the binder tape reels
- Replacing the binder tape reel
- Adjusting the binder tape registration
- How problems are displayed
- When a fault occurs
- Clearing paper jams
- Incorrect paper size message
- Interposer problems
- Binder tape fault
- Stitcher spool A fault
- Checking paper curl
- Printer rates
- Additional paper capacities
- Stock satisfaction guides
- Using non-standard stock
- Paper stock rotation
- Finisher satisfaction guides
- Customer support
- Operator training
- Routine maintenance
DocuPrint 180
Table of contents
- Table Of Contents
- Table Of Contents
- Fuser agent
- Adding dry ink
- related publications
- Feeder trays
- Loading feeder trays
- Loading trays 1 and 2
- Loading trays 3, 4, 5, and 6
- Output trays and bins
- Checking and unloading high-capacity stacker (HCS) bins
- fuser agent
- adding dry ink
- Cleaning
- Cleaning the sensors and the reflective surfaces
- Cleaning the Q850 sensor
- Cleaning the Q1011 sensor and mirror
- Cleaning additional sensors
- Q1106 and Q1166
- Sensor Q1164
- Maintenance and support services
- Xerox Font Center
- Xerox Customer Education
DocuPrint 180
Table of contents
- laser safety
- operation safety
- Table Of Contents
- Table Of Contents
- about this guide
- related publications
- feeder trays
- loading feeder trays
- Loading trays 1 and
- Loading trays 3, 4, 5, and
- output trays and bins
- checking and unloading high-capacity stacker (hcs) bins
- fuser lubricant
- adding dry ink
- replacing the dry ink waste container
- cleaning the sensors and the reflective surfaces
- cleaning the q850 sensor
- cleaning the q1011 sensor and mirror
- cleaning additional sensors
- sensor q
- cleaning the 4mm cartridge tape drive
- Xerox Customer Services Support Center
- Xerox Documentation and Software Services
- Xerox Customer Education
DocuPrint 180
Table of contents
- the system
- laser safety
- operation safety
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Introduction to the graphical user interface
- related publications
- The graphical user interface screen
- Using the user interface screens
- Buttons
- Moving a window or icon
- Entering text
- Exiting a window
- IPS main window
- Menus
- Diagnostics menu
- Administration menu
- System Options menu
- Output Configuration section
- Setup and status information
- Host Job Control section
- Subwindow buttons
- Powering on the IPS system
- Powering off the IPS system
- In routine operation
- After a power outage
- Printer status
- Resuming printing
- Removing media from the processor
- setting up the printer
- Selecting a language
- Specifying the system interface
- Selecting channel interface
- Selecting TCP/IP interface
- Enabling or disabling the modem
- Setting time for power-saver (slumber) mode
- Allocating memory for resources
- Displaying and adding resident fonts
- Adding resident fonts
- Loading the IPS software license text string
- Entering a Diagnostic Authorization string (180 IPS)
- Switching modes (Dual Mode)
- Setting the system configuration
- Privilege Modes
- Changing the Privilege Mode
- Changing the password for a Privilege Mode
- Accessing configuration tasks
- Configuration menu tasks
- Specifying the maximum simplex value
- Rotating the page origin
- Selecting the MICR mode (96/4635/180 MICR IPS only)
- Specifying the media units
- Setting optional processing parameters
- Diagnostics menu tasks
- Capturing and executing a trace
- Executing a captured trace
- Printing a trace file
- Setting of the debug level
- Updating the software using a CD or a diskette
- Updating the software remotely
- System Options menu tasks
- Specifying the input configuration
- Example of an input configuration
- Selecting simplex or duplex printing
- Setting up margin values
- Setting up the Media Library
- Creating a media icon
- Changing a media icon
- Adding a new input configuration
- Changing an input configuration file
- Deleting an input configuration file
- Correcting a feeder tray mismatch error
- Specifying the output configuration
- Example of an output configuration
- Creating a new output configuration
- Changing an output configuration
- Adding a DFA profile
- Changing a DFA profile
- Backing up and restoring configuration files
- Saving configuration files to diskette
- Restoring configuration files from diskette
DocuPrint 180
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- intended audience
- DocuPrint IPS overview
- DocuPrint IPS printer capabilities
- Document types
- AFP summary
- AFP resources
- AFP architecture
- PSF platforms
- Mainframe connections
- AS/400 connections
- RS/6000 connections
- InfoPrint Manager remote connection
- InfoPrint Manager LAN connection
- TCP/IP connection: Token Ring
- PSF/2
- PSF/2 LAN
- PSF/2 Token Ring TCP/IP
- DocuPrint IPS system
- DocuPrint IPS architecture
- Data towers
- Resource towers
- Product capabilities
- Connectivity solutions
- IPS application migration
- Elixir
- INDEX
- PReS
- Fonts
- versus 300 pel libraries
- Custom fonts
- Page segments
- Images
- Pixel doubling
- Input tray attribute considerations
- Continuous form to cut sheet conversion
- Incorporating Xerox value-added features
- Variable and constant data
- Conditional processing
- Overlays
- Page segments and images
- Lines and borders
- Shading and shaded form boxes
- Resource interpolation
- Disable hardware scaling and alternate shading
- micr applications
- xerox e13b and cmc-7 micr fonts
- micr application resources
- input and output tray processing
- feeding and finishing
- commonly asked questions
- what is the diagnostic lockout feature on the docuprint 180 ips
- docuprint ips printer specifications
- docuprint ips printer specifications - input trays and feeding options
- docuprint ips printer specifications - output trays and finishing options
- other considerations
- hints and tips
- mainframe data flows
- as/400 data flow
- rs/6000 data flow
DocuPrint 180
Table of contents
- laser safety
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Starting and stopping the system
- Setting the Printer Controller date and time
- about this guide
- related publications
- Using the system interface
- Change Administrator Password
- Using remote access (telnet)
- Using utility commands
- Eject Floppy
- Copy Documents to Tape
- Examine Document
- Install Update from Floppy
- Restore Site Files
- Restore Xerox Files
- Set Status Message
- Install Feature License
- Install FlexLicense from Floppy
- Install License command
- Changeable parameters
- Options
- Reviewing Questions and Answers: Options 3 and 4
- Reinitializing Software: Option 6
- Saving and Restoring Values: Options 7 and 8
- Recovering the Job Pool Manager database
- Enabling and disabling remote service
- Disable modem
- Enable Remote Shell
- Print Documents from Floppy
- Powering on the system
- Powering off the system
- Powering off and on the system after a power failure
- Start
- Restart System
- IPS mode to NPS mode
- DocuPrint NPS on a Novell network
- Configuring DocuPrint as a PSERVER
- Configuring DocuPrint as an RPRINTER
- Setting system defaults
- Set Default Media
- Show Default Media
- Set Tray <n> Tray <m>
- Unset Tray <n>
- Setting printer options
- List Options
- Setting imager parameters
- Change Imager Parameters
- Restore Default Imager Parameters
- Show PCL Imager Parameters
- Restore Default PCL Imager Parameters
- Setting PCL parameters
- Change PCL Parameters
- Restore Default PCL Parameters
- Show PCL Parameters
- Input and Output profiles
- Create Profile
- Profile parameters
- setting the printer controller
- Billing meters for models 4050, 4090, 4850, 4890, and 92C NPS8
- print log
- managing fonts
- deleting fonts
- list fonts
- print font list
- managing forms
- verifying correct installation
- security issues
- INDEX
DocuPrint 180
Table of contents
- related publications
- Table Of Contents
- Table Of Contents
- about the reference set
- CP (COMPRESS command) messages
- OSS (operating system software) messages
- OS Level 1: Information
- OS Level 2: Routine Maintenance
- OS Level 3: Printer problem
- OS Level 4: System or tape problem
- OS Level 6: Job integrity
- Xerox Customer Support Center
- Xerox Font Center
- OS Level 7: System problem
- OS Level 8: Probable severe software error
- OS Level 9: Probable severe hardware error
- scale command messages
- Appearance error message
- Appearance warning messages
- Fatal error messages
- Informational messages
- Master error messages
- Master warning messages
- System problem messages
- additional messages
- Numbered Xerox DocuPrint 180 LPS messages
- xerox customer support center
- Xerox Customer Service Support Center
- xerox font center
manualsdatabase
Your AI-powered manual search engine