9-6Adaptec Ultra320 SCSI Cards User’s GuideNote: The file hotp320.reg adds Hot-Plug related entries intothe NT Registry, including the driver-specific registry value/HOTPLUG. Running hotp320.reg will overwrite your currentdriver-specific registry values located at:\HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\adpu320\Parameters\Device\DriverParametersIf you have previously added other driver specific registryvalues, you should note them before running the hotp320.regfile. After running hotp320.reg, you may verify and restorethose previously added driver-specific registry values, ifneeded.Using Windows NT 4.0 and the Host AdapterThis section contains useful information on using Windows NT 4.0and your host adapter.Removing a Host AdapterNote: In order to add or remove SCSI controllers fromWindows NT you must be logged on as Administrator.Removing a host adapter can be as simple as physically removingit from the slot when your computer is shut down.Windows NT 4.0 starts and functions properly in thisconfiguration, but a Warning message is generated every time youstart Windows NT 4.0.Caution: If you have removed a host adapter but still haveother host adapters of the same type installed in yourcomputer, do not use Windows NT 4.0 Setup to remove thedevice driver.!
