11-11Installing the SCSI Driver for UnixWare, OpenServer, and Open UnixTroubleshootingProblems and SolutionsMy computer crashes or displays panic messages during the bootup procedure!You may have to boot from the backup kernel created earlier, andthen perform the driver update procedure again.To boot from the old kernel:1 Reboot the computer.2 At the Booting UNIX System… prompt or loading UnixWare/Open Unix graphics, press the Spacebar.3 From the [boot]# prompt, first type BOOTPROG=old kernel(for example, BOOTPROG=unix.work) and press Enter. Then,type go and press Enter. Your computer should now boot fromthe backup kernel created earlier in Installing the Driver WhenUnixWare/Open Unix is Already Installed on page 11-4.To repeat the driver update procedure:1 Follow the instructions in Removing the Driver on page 11-10 todelete the driver from your computer.2 Perform the driver update procedure again. See Installing theDriver When UnixWare/Open Unix is Already Installed onpage 11-4.