6-3Installing the HostRAID Driver for Windows NT 4.06 The screen displays the adapter drivers supported on the disk.Select Adaptec HostRAID U320 driver for Windows NT 4.0and press Enter.7 If you want to add drivers (other than for HostRAID), press Sand repeat Step 5 for each additional adapter and insert theappropriate disk provided by the hardware manufacturer.8 Press Enter to continue with the Windows NT 4.0 operatingsystem setup. Follow the instructions on-screen and in theWindows NT 4.0 documentation to complete the installation.Installing the Driver When Windows NT 4.0 is Already InstalledTo update or install the a320raid.sys driver if Windows NT 4.0 isalready installed:1 Start Windows NT 4.0.2 Click the Start button on the Windows NT 4.0 task bar, and thenpoint to Settings.3 Click the Control Panel.4 Double-click the SCSI Adapters icon.5 Click the Drivers tab, then click the Add button.6 In the Install Driver window, click the Have Disk button.7 Insert the Adaptec HostRAID driver for Windows disk inyour floppy disk drive. Enter the following path to theinstallation files, then click OK.a:\nt48 In the Install Driver window, Click OK.9 You must restart your computer for the changes to take effect.Click Yes to restart your computer.