F-5Migrating from HostRAID to Adaptec Ultra320 SCSI4 When the driver is copied on the hard disk drive, click Finish.5 You will be prompted to restart the computer. Select Yes.Note: To migrate the nonboot channel from HostRAID toSCSI, follow the instructions for migrating from a bootchannel for your other channel.Migrating With Windows XPInstalling the Adaptec Ultra320 SCSI DriverTo migrate the boot channel on HostRAID to Adaptec Ultra320SCSI with a Windows XP operating system, follow these steps:1 Start Windows XP.2 Go to the Device Manager by right-clicking on My Computer,then click on Properties=>Hardware=>Device Manager.3 At the Device Manager, click the + sign next to the SCSI andRAID controllers entry to expand it.4 There will be two entries representing the dual channels.Right-click on the channel that you are booting from, then selectUpdate Driver.Note: If you are not sure which channel your boot drive isconnected to, change the view of the Device Manager toView Devices by Connection, and find out which drivesare connecting to which channels.5 Select Install from a list or specific location (advanced), thenclick Next.6 Select Dont’ search, I will choose the driver to install, thenclick Next.7 Click the Have Disk button.8 Insert the Adaptec Installation CD into the CD-ROM drive andclick Browse. If the CD automatically opens a welcome screen,click the Exit button to close it.
