12-3Installing the SCSI Driver for Sun Solaris6 Press F2 again to load all the identified devices. Follow Sun’sinstallation documentation to finish the operating systeminstallation.7 The installation program requires the Adaptec driver disk at theend. Reinsert the driver disk, then press Enter as instructed bythe console on the upper left screen.Installing the Driver When Solaris 9 is AlreadyInstalledTo install the driver when Solaris is already installed:Note: To update or install the driver, we recommend you do soin Single-User mode (System Maintenance Mode), backupimportant data. Refer to the Sun documentation forinstructions.1 Login as root or become super user. Backup kernel and originaldrivers in /platform/i386/kernel by typing:cp -r /platform/i386/kernel /platform/i386/kernelx2 Disable volume manager if it is running by typing:#/etc/init.d/volmgt stop3 Insert the Adaptec driver disk into the floppy disk drive.4 Mount the driver disk to a mount point (/mnt) by typing:#mount -F pcfs /dev/diskette /mnt5 Run install.sh script:#/mnt/DU/sol_29/i86pc/Tools/install.shYou will be notified if there is an Adaptec Ultra320 driveralready installed in your system. If you want to continue theinstallation, install script will backup the current Ultra320driver into /.ADPU320 directory.6 Unmount the disk by typing:#umount /mnt
