12-5Installing the SCSI Driver for Sun SolarisRemoving the Driver From Solaris 9If you no longer need the driver, you can use the followingprocedure to remove it:1 Make sure your Adaptec Ultra320 controller is not the bootcontroller and login as root or become super user.2 Remove the driver by typing:#pkgrm ADPU320 (use uppercase ADPU320)3 Follow the on-screen instructions for removing the driver.4 Create /reconfigure file by typing:#touch /reconfigureThis will cause the operating system to check for removeddevices on next system boot.5 Restart the system by typing:#shutdown -i0 -g30 -yThe shutdown options are: ’-i0’ to bring system to 0 init state. ’-g60’ to shut the system down in 60 seconds. ’-y’ continue to shutdown without user intervention.Command Line Options To display system information such as device configurations,type:#prtconf or #sysdef To displays system diagnostic messages, type:#dmesg To check driver version, type:#pkginfo
