10-10Adaptec Ultra320 SCSI Cards User’s GuideTroubleshootingError MessagesThe error messages listed below are the messages associated withthe adpu320.ham driver. Messages are listed sequentially accordingto the last three digits of the error code. For example, [xxxxx080],[xxxxx081], [xxxxx082], and so on.Note: When reporting problems to Customer Support, be sureto include the complete error code in your problemdescription.[xxxxx080] Unable to allocate memoryThis indicates that there may be a problem with the amount ofmemory installed in your system. Verify that your system has atleast the minimum amount of memory required by your operatingsystem.[xxxxx081] Adapter software initialization failureAn error has occurred while the driver was setting up its internaldata structures. Verify that your adapter is supported by thisversion of the driver.[xxxxx082] Internal driver errorAn error has occurred while the driver was setting up its internaldata structures. Try installing the most up-to-date version of thedriver available from the Adaptec Web site.[xxxxx083] Adapter not supported by this version of the driverYour adapter is not supported by the driver on your system. Youmay have installed a new adapter and have not updated the driveron your system.[xxxxx084] Adapter software initialization failureAn error has occurred while the driver was setting up its internaldata structures. Try installing the most up-to-date version of thedriver available from the Adaptec Web site.
