D-6Adaptec Ultra320 SCSI Cards User’s GuideIf You Do Not Have Access to a PreinstalledSystemTo create the driver disk for all operating systems:1 Set your system BIOS so that your computer boots from theCD-ROM drive.2 Insert the Adaptec Installation CD into your CD-ROM driveand turn on the computer.3 Follow the instructions and respond to prompts as necessary toget to the Adaptec Start Menu.4 Click Create Driver Disk, then select the appropriate operatingsystem.5 Select the appropriate floppy drive letter, then select theappropriate format.6 When prompted, insert a floppy disk and then click OK. Thesystem creates the driver disk.7 Remove and label the driver disk.Note: If you are creating a driver disk for a non-Windowsoperating system, you must insert a formatted floppy diskinto your A: drive.