B-2Adaptec Ultra320 SCSI Cards User’s Guide3 Click the Words option.In the Data section of the dialog box, the entry in the second rowand second column (to the right of the 0010: entry) lists the errormessage generated by the driver. The common error messages forthe driver are described in Driver Error Messages:Note: The entry in the third row of the last column identifiesthe SCSI ID of the device originating the error.Driver Error MessagesThe following error messages are listed sequentially according tothe last three digits of the error message. For example, [xxxxx010],[xxxxx011], [xxxxx012], and so on.Note: When reporting problems to Customer Support, be sureto include the complete error message in your problemdescription.[xxxxx004] Command completed with error[xxxxx005] Command completed with error[xxxxx006] Command completed with errorA request issued to a target device completed with indication thatthere is an error. In most cases, the error is recovered and normaloperations continues.[xxxxx010] Error issuing commandAn error has occurred while the driver was setting up its internaldata structures. Try installing the most up-to-date version of thedriver available from the Adaptec Web site.[xxxxx011] Error issuing commandThe requested command is not supported by this driver.[xxxxx012] Error issuing command[xxxxxx99] Error issuing commandThe driver does not recognize the target device.