F-10Adaptec Ultra320 SCSI Cards User’s Guide13 Press Esc, save change, then exit.If you are using a dual channel card, select Channel B andrepeat the steps to disable HostRAID support.Completing the Adaptec Ultra320 SCSI Driver InstallationAfter you have installed the Adaptec Ultra320 SCSI driver anddisabled HostRAID support, complete the installation by followingthese steps:1 Restart Windows NT 4.0.You may receive the following Service Control Manager error:At least one service or driver failed during system startup. Use EventViewer to examine the event log for details.To prevent this error from reoccuring during subsequentrestarts, Click on Start=>Settings=>Control Panel anddouble-click the SCSI Adapters icon.2 Click the Drivers tab, select the Adaptec HostRAID RAIDdriver, and click Remove.3 When the message Are you sure you want to remove this drivers?appears, Click Yes and restart the system.
