11-6Adaptec Ultra320 SCSI Cards User’s Guide4 Type mail and press Enter. The mail messages tell you if theinstallation was successful.If a mail message informs you that the installation has failed,turn to Troubleshooting on page 11-11.5 Type pkginfo -l adpu320 and press Enter.6 Verify that the adpu320 driver is now listed.If the adpu320 driver does not appear in the pkginfo listing, turnto Troubleshooting on page 11-11.The listing should be similar toPKGINST: adpu320NAME: Ultra320 Driver for UnixWare 7.1.1Modify the New System File1 Display the contents of the UnixWare/Open Unix file by typingthe following and pressing Enter:cat /etc/conf/sdevice.d/adpu3202 If your computer is to boot from a device connected to a Ultra320host adapter, verify that the line $static is present immediatelybelow the line $version 2.3 If your computer is not to boot from the host adapter SCSI bus,and you wish to leave the driver as a loadable module, edit andverify that the line $static is not present directly below the line$version 2.Rebuild the UnixWare/Open Unix KernelTo rebuild the UnixWare/Open Unix kernel with the new changes:1 Type the following at the # prompt and press Enter after eachline:cd /etc/conf/bin./idbuild -BStatus messages appear.
