6-5Installing the HostRAID Driver for Windows NT 4.0Boot Order In Windows NT 4.0 versus RAID ManagementDuring Windows NT 4.0 installation, Windows NT 4.0 does notshow the devices in the boot order. Instead, it shows the arrayswith the lower ID first. To minimize confusion duringWindows NT 4.0 installation, try one of the following: Disconnect all devices other than members of the boot array, sothat only one logical device is present in the Windows NT 4.0installation. Reconnect all other devices after Windows NT 4.0is successfully installed. Configure the boot array in the system BIOS or with SCSISelectso that the lowest ID is a member of the boot array.
