9-11Installing the SCSI Driver for Windows NT 4.06 At the DOS prompt do a change directory to I386.7 Once you are in the I386 directory, type WinNT /B.This should begin a floppy-less installation of Windows NT 4.0.The installation process should be able to find the SCSIcontroller since the OEMSETUP.INF and drivers are current foryour SCSI card.The system is hanging and I can’t copy files.All of Intel’s Pentium Processors require adequate heat sinks andventilation. If the processor is running excessively hot, this cancause problems when installing Windows NT 4.0 (such as hangingor not being able to copy files). Make sure you have an adequatelysized heat sink and good ventilation. If you're overclocking yourprocessor, then set it back to the manufacturers default clockspeed.Error MessagesError messages generated by the adpu320.sys driver can be viewedby opening the Windows NT 4.0 Event Viewer error logs. For moreinformation on these Error Messages, see Appendix B, WindowsError Messages.
