D-3Creating Driver Floppy DisksRunning WindowsTo create the driver disk for all operating systems:1 Insert the Adaptec Installation CD into your CD-ROM driveand select Adaptec Utilities from the Main menu.2 From the Adaptec Utilities menu, select Create Driver Disk.3 Select the appropriate operating system and press Enter.4 Select the appropriate driver disk option and press Enter.5 When prompted, insert a blank floppy disk into your A: driveand follow the on-screen instructions.Note: If you are creating a driver disk for a non-Windowsoperating system, you must insert a formatted floppy diskinto your A drive.Running UnixWare or Open UnixTo create the driver disk for UnixWare or Open Unix:1 Open a UNIX terminal.2 At the root prompt, type:sdiconfig -l3 Locate the device node for your CD-ROM drive, for example,c1b0t1l0. Mount the CD by typing:mount -F cdfs -r /dev/cdrom/c1b0t1l0 /mntwhere c1b0t1l0 is the device node.