F-8Adaptec Ultra320 SCSI Cards User’s Guide3 At the Please select the best match... window, keep the defaultdrive that is highlighted and click Next.4 You may be prompted with this warning message:“The software you are installing for this hardware...has not passedWindows Logo testing to verify its compatibility with Windows XP...”Ignore the warning and click Continue Anyway.5 When the driver is copied on the hard disk drive, click Finish.6 When prompted, click Yes to restart your system.Note: To migrate the nonboot channel from HostRAID toSCSI, follow the instructions for migrating from a bootchannel for your other channel.Migrating With Windows NT 4.0Installing the Adaptec Ultra320 SCSI DriverTo migrate the boot channel on HostRAID to SCSI with aWindows NT 4.0 operating system, follow these steps:1 Start Windows NT.2 Click on Start=>Settings=>Control Panel.3 In the Control Panel, double-click the SCSI Adapters icon andclick on the Drivers tab, then click Add.4 From the Install Driver window, click Have Disk....5 Insert the Adaptec Installation CD into the CD-ROM drive. Ifthe CD automatically opens a welcome screen, click the Exitbutton to close it.6 At the Install from Disk... window, click the Browse button andpath D:\drivers\windows\winnt40 (where D: is the CD-ROM driveletter). Click OK.7 From the Install Driver window, select the the appropriateAdaptec SCSI card from the list and click OK. Restart thesystem.