12-4Adaptec Ultra320 SCSI Cards User’s Guide7 Verify if the newly installed Ultra320 driver is on your systemand you have the correct version by typing:#pkginfo -l ADPU320 (use uppercase ADPU320)8 Create /reconfigure file by typing:#touch /reconfigureThis will cause the operating system to check for newlyinstalled devices on the next system boot.9 Reboot the system by typing:#shutdown -i0 -g30 -yThe shutdown options are: ’-i0’ to bring system to 0 init state. ’-g60’ to shut the system down in 60 seconds. ’-y’ continue to shutdown withou user intervention.10 Follow the hardware instructions, turn off the system theninsert the Adaptec Ultra320 controller into one of the PCI slots.11 If you forgot to create a /reconfigure file, on the next boot screen,enter the boot option as follows:’b -r’This boot option will also cause the operating system to checkfor newly installed devices.
