F-9Migrating from HostRAID to Adaptec Ultra320 SCSIDisabling HostRAID SupportAfter installing the HostRAID driver, you must disable HostRAIDsupport before you can use the standalone SCSI features.Warning: Before you disable HostRAID, for RAID 1, you mustbreak a RAID 1 array. See the following steps for instructions.For RAID 0, you will loose all your data if you try to disableHostRAID.To disable HostRAID, follow these steps:1 Press Ctrl+A keys simultaneously when the Adaptec BIOSappears.2 When your SCSI Card appears, press Enter.If you are using a dual channel card, select Channel A, thenpress Enter.3 On any channel containing an array, scroll down and selectConfigure/View HostRAID Settings.4 Select the array by scrolling to it and pressing Enter. This willdisplay the members of that array.5 Press the D key to delete the selected array. When prompted toconfirm deletion of the array, select Yes.6 At the Deleting Information window, select None and pressEnter.7 When prompted, select Yes to continue.8 Repeat Steps 4 through 7 if there is another array. You will alsoneed to delete any spares.9 Once all the arrays and spares have been deleted, press Esc togo back to the SCSISelect menu.10 Use the arrow keys to select Configure/View SCSI Controllerand press Enter.11 From the Configuration menu, select HostRAID and pressEnter.12 From the HostRAID Pop-up menu, select Disabled.
