F-6Adaptec Ultra320 SCSI Cards User’s Guide9 Click on the path D:\drivers\windows\win32bit orD:\drivers\windows\win64bit (where D: is the CD-ROM drive letter).10 Click on the adpu320, then click Open.11 Click OK.12 Scroll down the list and select your Adaptec Ultra320 SCSIdriver, then click Next.13 Click Next again. You may be prompted with this warningmessage:“The software you are installing for this hardware...has not passedWindows Logo testing to verify its compatibility with Windows XP...”Ignore the warning and click Continue Anyway.14 When the driver is copied on the hard disk drive, click Finish.15 You will be prompted to restart the computer. Select Yes.The new Adaptec Ultra320 SCSI driver will be displayed underSCSI and RAID controllers in the Device Manager.Disabling HostRAID SupportAfter installing the Adaptec Ultra320 SCSI driver, you must disableHostRAID support before you can use the standalone SCSI.Warning: Before you disable HostRAID, for RAID 1, you mustbreak a RAID 1 array. See the following steps for instructions.For RAID 0, you will loose all your data if you try to disableHostRAID.To disable HostRAID, follow these steps:1 Press Ctrl+A keys simultaneously when the Adaptec BIOSappears.2 When your SCSI Card appears, press Enter.If you are using a dual channel card, select Channel A, thenpress Enter.3 On any channel containing an array, scroll down and selectConfigure/View HostRAID Settings.
