3-13Configuring the Adaptec SCSI Card with SCSISelectThe Configuration menu appears. The Configuration menudisplays the current settings for the SCSI bus interface. The BIOSInformation section at the bottom of the menu displays theInterrupt (IRQ) Channel and I/O Port Address of the selecteddevice. This section cannot be modified.Note: Text displayed in yellow is for information only andcannot be selected.From the Configuration menu, you can access the followingsettings: Boot Device Configuration SCSI Device Configuration Advanced Configuration OptionsArrow keys to move cursor, to select option, to exit (*=default)SCSI Bus Interface DefinitionsSCSI Controller ID ........................................ 7........SCSI Controller Parity ....................................EnabledSCSI Controller Termination ...........................AutomaticAdditional OptionsBoot Device Configuration.............................. Press SCSI Device Configuration .............................Press Advanced Configuration Options .....................Press HostRAID.......................................................Disabled - Reset to SCSI Controller DefaultsAdaptec SCSISelect(TM) Utility vX.XX39320A at slot 6, 00:0E:00ConfigurationBIOS InformationInterrupt (IRQ) Channel.................................10I/O Port Address............................................FC00h, F000h
