8-4Adaptec Ultra320 SCSI Cards User’s GuideNote: When booting on an IA-64 system with an EFI BIOS, besure to select the Microsoft Windows XP 64-bit Editionoption to continue installing the operating system.Updating the Driver When Windows is AlreadyInstalledTo update or install the driver if Windows is already installed makesure you:1 Create a Windows driver disk. See Appendix D, Creating DriverFloppy Disks.2 Start Windows.3 Click the Start button on the Windows task bar, then point toSettings.4 Click the Control Panel.5 Double-click the System icon.6 Select the Hardware tab, then click the Device Manager button.7 Under SCSI and RAID Controllers, click on the + sign to the left.This displays the SCSI adapters currently installed. Right-clickon the device you wish to update, then select Properties.8 Click the Driver tab, then click the Update Driver button. TheUpdate Device Driver Wizard starts. Click Next.9 Select the Search for a Suitable Driver option, and click Next.10 Be sure the only selection that is checked is Floppy Drives.Insert the Windows driver disk that you created into yourfloppy disk drive, then click Next.11 At this step, Windows recommends one of two choices. If itrecommends using the driver found on the driver disk, clickNext and skip to Step 12. It might recommend that you keep theexisting driver and mention that it found other suitable drivers.If this is the case, select Install one of the other drivers, andclick Next.