3-11Configuring the Adaptec SCSI Card with SCSISelect Support Removable Disks Under INT 13 as Fixed Disks—(Default: Disabled) Determines which removable-media drivesare supported by the SCSI card BIOS. The options are asfollows: Disabled— No removable-media drives running underDOS are treated as hard disk drives. Software drivers arerequired because the drives are not controlled by the BIOS.Caution: You may lose data if you remove a removable-media cartridge from a SCSI drive controlled by theSCSI card BIOS while the drive is on. If you want to beable to remove the media while the drive is on, installthe removable-media software driver and set SupportRemovable Disks Under BIOS as Fixed Disks toDisabled. Boot Only—Only the removable-media drive designated asthe boot device is treated as a hard disk drive. All Disks—All removable-media drives supported by theBIOS are treated as hard disk drives. This setting has noeffect on drives under NetWare because NetWareautomatically supports removable-media drives as harddisk drives.Note: The Boot Only and All Disks options are availableonly if the SCSI Controller BIOS option is enabled. BIOS Support for Bootable CD-ROM—(Default: Enabled)When set to Enabled, the SCSI card BIOS allows the computerto boot from a CD-ROM drive. If booting from a hard disk orother device, make sure no bootable CD is inserted, or disablethis option.HostRAID OptionsHostRAID—When set to Enabled, the user can create andmaintain RAID arrays. To enable HostRAID functionality and useit to manage RAID arrays, see Chapter 4, Using the SCSISelectUtility to Manage Arrays.!
