10-2Adaptec Ultra320 SCSI Cards User’s GuideInstalling the Driver When Installing NetWareTo install the adpu320.ham driver when you install NetWare, followthe instructions below for the version of NetWare you areinstalling.NetWare 5.1 and 6.xFollow these instructions only if you are installing NetWare 5.1 and6.x for the first time:1 Begin installation of NetWare 5.0/6.x on your server asinstructed in your NetWare documentation.2 When a screen appears that asks you to add device drivers,select Modify and press Enter.3 Select Storage adapters and press Enter.4 Press Insert to add storage drivers.5 Press Insert to add an unlisted driver.6 Insert the Ultra320 FMS driver floppy disk for NetWare intoyour floppy disk drive.7 Press F3 and type a:\netware\v51_v6x as the path to theadpu320.ham driver for NetWare.8 Select adpu320.ham and press Enter.9 Select Return to driver list and press Enter.10 To install additional adapters, follow the procedures fromStep 4.11 When you are finished, select Continue to complete theinstallation.
