10-6Adaptec Ultra320 SCSI Cards User’s GuideSample Load CommandsHere is a simple load command with no option switches (if loadedfrom drive A):load a:\netware\adpu320.hamIf an error message appears when attempting to load the driver,refer to Troubleshooting on page 10-10.Here is an example of the adpu320.ham driver being loaded withcommand line options (if loaded from drive A):load a:\netware\adpu320.ham verbose=y slot=2Using NetWare and the Host AdapterThis section contains useful information on using NetWare andyour host adapter.Using Removable MediaThe adpu320.ham driver module fully supports removable-mediadisk drives, including magneto-optical drives. Removable media istreated as a standard SCSI hard disk, with some exceptions: The driver recognizes and registers only media with512 bytes/sector. NetWare allows you to mount/dismount the media and tolock/unlock the media.NetWare’s monitor.nlm program supports several removable-mediaoptions. To view and configure these options:1 Load monitor.nlm to display the various options.2 Select Disk Information. All system disk drives appear.