8-5Installing the SCSI Driver For Windows 2000/2003 and XP12 Select the driver from the Adaptec provider that best fits youradapter, and click Next.13 If you get a warning that a Digital Signature was not found,check Adaptec’s Web site periodically for updated drivers withthe Digital Signature. Click Yes.14 Click Finish. You may be required to restart your computer.Note: If your Adaptec SCSI Card is a dual-channel adapter, besure to update both references in the Device Manager beforerestarting your computer.Upgrading a Windows NT 4.0 or Windows 2000Installation to Windows Server 20031 With your operating system started, insert your WindowsServer 2003 CD and choose to upgrade your system. Yoursystem restarts.2 The Windows Server 2003 Setup program starts. Press F6 whenthis message is displayed:Press F6 if you need to install a third-party SCSI or RAID driver...3 Follow the directions from Installing the Driver When InstallingWindows on page 8-2.Using Advanced Configuration ParametersAdvanced users may use software parameters to alter theconfiguration of the Windows device drivers supplied by Adaptec.For more information on using advanced configurationparameters, see Appendix C, Using Windows Advanced ConfigurationParameters.
