12-6Adaptec Ultra320 SCSI Cards User’s GuideAdditional NotesKnown/Unresolved or FYI IssuesExternal RAID Enclosure Configuration:1 Edit /kernel/drv/sgen.conf and add the following line:device-type-config-list="processor";Uncomment the lines that correspond to all LUNs as seen onRAID enclosure. For example, remove # from the line:#name=”sgen” class=”scsi” target=0 Lun=0To enable read streaming for Ultra320 hard drives that supportthis option:The read streaming option for Solaris can be changed in/platform/i86pc/kernel/drv/adpu320.confFollowing are the two new lines created for user configurableoptions:#To enable u320 read streaming protocol, setADPU320_SCSI_RD_STRM to 1 ADPU320_SCSI_RD_STRM=0;2 Edit /kernel/drv/sd.conf and add the LUN as seen on the RAIDenclosure.3 Run the command by typing:#devfsadm -v -i sgen4 Make sure SGEN is loaded by typing in the followingcommand:#add_drv sgen5 Restart the system then type in the following boot parameter atthe boot prompt:b -drv