F-4Adaptec Ultra320 SCSI Cards User’s Guide8 Repeat Steps 4 through 7 if there is another array. You will alsoneed to delete any spares.9 Once all the arrays and spares have been deleted, press Esc togo back to the SCSISelect menu.10 Use the arrow keys to select Configure/View SCSI Controllerand press Enter.11 From the Configuration menu, select HostRAID and pressEnter.12 From the HostRAID Pop-up menu, select Disabled.13 Press Esc, save change, then exit.Completing the Adaptec Ultra320 SCSI Driver InstallationAfter you have installed the Adaptec Ultra320 SCSI driver anddisabled HostRAID support, you need to complete the installationso that the Windows operating system can detect the new driverhardware.To complete your Adaptec Ultra320 SCSI driver installation, followthese steps:1 Restart Windows 2000.Windows 2000 will automatically discover the new hardwareand will prompt you for the Adaptec Ultra320 SCSI Card CD.2 You may be prompted with this warning message:“The software you are about to install does not contain a MicrosoftDigital Signature...”Ignore the warning and click Yes to continue.3 Insert the Adaptec Installation CD into the CD-ROM drivewhen prompted, click on the path D:\drivers\windows\win32bit(where D: is the CD-ROM drive letter), then click OK.
