11-8Adaptec Ultra320 SCSI Cards User’s GuideInstalling the Driver When InstallingOpenServerTo install the ad320 driver at the same time you install OpenServer:Note: If your CD-ROM target id (SCSI id) is not 5 (the default),you will need to note your id for the installation process.1 Insert the Install CD of the OpenServer package into the bootCD-ROM drive. Start your computer.Wait for the boot:/ prompt to appear.2 Type restart link=ad320 then press Enter.3 When prompted, insert the Ultra320 driver floppy disk forOpenServer (btld) into the floppy disk drive, then press Enter.(See Appendix D, Creating Driver Floppy Disks for informationon creating driver floppy disks.)4 Follow the on-screen instructions to continue with installation.Refer to the OpenServer documentation and on-screen help filesfor help in selecting options.Installing the Driver When OpenServer isAlready InstalledTo update or install the ad320 driver on a system whereOpenServer is already installed, follow the instructions in thissection.1 Mount the floppy disk by typing:mount /dev/fd0 /mnt2 Type btldinstall /mnt3 When prompted to grant relinking of the kernel, type y.Note: Remember that OpenServer commands are case sensitive.Enter the commands exactly as shown.