3-3Configuring the Adaptec SCSI Card with SCSISelectStarting SCSISelectTo start SCSISelect:1Turn on or restart your computer.During the startup process, pay careful attention to themessages that appear on your screen.2When the following message appears on your screen, press theCtrl-Akeys simultaneously (this message appears for only afew seconds):Press for SCSISelect (TM) Utility!3Select SCSI ChannelAorB.4From the menu that appears, use the arrow keys to move thecursor to the option you want to select, then pressEnter.Display Messages duringBIOS Initialization[Auto-sync]Enabled, DisabledEnabledExtended INT 13 Translation forDOS Drives > 1 GBEnabled, DisabledEnabledPost Display Mode[Auto-sync]Verbose, Silent,DiagnosticVerboseSCSI Controller INT 13 SupportEnabledDisabled: ScanBusDisabled: Not ScanEnabledDomain ValidationEnabled, DisabledEnabledSupport Removable Disks UnderINT 13 as Fixed Disks2Disabled,Boot Only,All DisksDisabledBIOS Support for Bootable CD-ROM2Enabled, DisabledEnabledHostRAID Options:HostRAIDEnabled, DisabledDisabled1Setting is valid only if Multiple LUN Support is enabled.2Settings are valid only if host adapter BIOS is enabled.SCSISelectOptionsAvailable SettingsDefault Setting