11-10Adaptec Ultra320 SCSI Cards User’s Guide UnixWare/Open Unix/OpenServer supports auto-configuration. When adding multiple host adapters to anexisting UnixWare/Open Unix/OpenServer system, simplyinstall the board and reboot; the system automaticallyreconfigures and rebuilds the kernel. If you want to select a hostadapter to boot from, simply disable the BIOS on all other hostadapters. Make sure that the new board when added, does not interferewith the boot order.Removing the DriverIf you no longer need the adpu320 driver, you can use the followingprocedure to remove it completely:1 Back up all important computer files.2 At the UnixWare root prompt, type the following:For UnixWare/Open Unix:/etc/conf/bin/idinstall -d adpu320The following files will be deleted:/etc/conf/mdevice.d/adpu320/etc/conf/pack.d/adpu320/Driver.o/etc/conf/pack.d/adpu320/space.c/etc/conf/pack.d/adpu320/disk.cfg/etc/conf/sdevice.d/adpu3203 Then, rebuild the kernel (0 in -g0 is zero, not the letter O):/etc/conf/bin/idbuild -B -Kcp /etc/conf/cf.d/unix /unixcd /shutdown -g04 Reconfigure your computer for your alternate or replacementdrive controller, and reboot the computer.Note: This procedure is not supported with OpenServer.