Cabletron Systems Cabletron CyberSWITCH CSX5500 User Manual

Also see for CyberSWITCH 5500: Quick start Manual

Contents

Central Site Remote Access Switch 213CONFIGURING O FF - NODE S ERVER I NFORMATIONRADIUS Server4. Select (1) Primary Server to enter the following information:a. IP address of the Accounting Serverb. shared secret between the CyberSWITCH and Accounting Serverc. UDP port number used by the Accounting Server5. Optional: configure a secondary RADIUS Accounting Server. In the event that the primaryserver does not respond to system requests, the secondary server will be used for accountinginformation. The address of the Secondary RADIUS Server must not be the same as the PrimaryRADIUS Server.6. Select Miscellaneous Information. Specify the number of retries that the system will use with theAccounting Server, as well as the time between retries.7. Return to the Off-node Server Information Menu.8. Select Misc Off-node Server Options. A screen similar to the following will display currentsettings:9. Verify that RADIUS Accounting is enabled. If enabled, press to exit the menu. Ifdisabled, select the RADIUS Accounting function to enable the feature. (This selection is asimple toggle switch).U SING M ANAGE M ODE C OMMANDSoffnodeAllows you to change current settings for off-node server options. You may use this commandto enable the RADIUS Accounting feature.RADIUS ACCOUNTING Menu:Primary (Master) ServerIP Address is 010.000.000.108Shared Secret is “ralph”UDP Port Number is 1813Secondary (Slave) Serveris Not ConfiguredAccess Request RetryNumber of Access Retries is 3Time between Retries is 1 secondRADIUS Accounting Server Options:1) Primary (Master) Server2) Secondary (Slave) Server3) Miscellaneous InformationSelect function from above or for previous menu:Misc Off-node Server Options Menu:Current Settings1) Radius Accounting (Enable/Disable) Enabled2) Radius Type (RFC2138/Cabletron) RFC2138 compliant3) Dynamic Device Option (Enable/Disable) Enabled4) Dynamic Device Default SettingsSelect function from above or for previous menu: