Cabletron Systems Cabletron CyberSWITCH CSX5500 User Manual

Also see for CyberSWITCH 5500: Quick start Manual

Contents

Central Site Remote Access Switch 345CONFIGURING IPXIPX-Specific Information for Devices7. Enable IPX routing. Select IPX Routing and follow on-screen instructions.8. Enable make calls feature. Select Make calls for IPX data and follow on-screen instructions onlyif the CyberSWITCH is to dial-out to remote1.9. Although IPXWAN Protocol appears on the menu, the feature is not yet completely functional.10. Select Routing Protocol. A menu similar to the following will be displayed:11. Select routing protocol. When you select Triggered RIP/SAP, you will need to identify the WANpeer type as either active or passive. An active peer receives broadcasts at all times; a passivepeer receives broadcasts only when a connection is up.12. If you plan to use IPX over Frame Relay, and if you are also using a CSX200 or CSX400 on theother side of the Frame Relay connection, select IPX External WAN Net Num. Provide a uniquenumber that you will also reflect on the CSX200 or CSX400 platform.13. Select Spoofing Options. Make changes to default spoofing setup, if desired, through thefollowing menu:a. Press 1 to configure IPX watchdog spoofing. The following menu will be displayed:b. The screen includes default configuration values. If needed, make changes to the defaultvalues.IPX Device Routing Protocol Menu:1) None2) RIP/SAP3) Triggered RIP/SAPEnter selection or press for previous menu [default=None}:31) ACTIVE2) PASSIVETriggered RIP/SAP WAN Peer type [default=ACTIVE]:1IPX Device Spoofing Menu:1) IPX Watchdog Spoofing2) SPX Watchdog Spoofing3) Serialization Packet Handling4) Message Packet HandlingSelect function from above or for previous menu: 1Device Level IPX Watchdog Spoofing Menu:1) Default Handling is Discard2) Handling while the connection is up is Forward3) Handling for the special period after disconnecting is Spoof4) Special period of time after disconnecting is 120 MinutesSelect function from above or for previous menu: