Cabletron Systems Cabletron CyberSWITCH CSX5500 User Manual

Also see for CyberSWITCH 5500: Quick start Manual

Contents

Central Site Remote Access Switch 315CONFIGURING A DVANCED IP ROUTINGDHCP Proxy ClientDHCP P ROXY C LIENTCONFIGURING THE DHCP P ROXY CLIENTIn order to configure the DHCP Proxy Client, you must first enable the client, and then configureclient information for a WAN or a WAN (Direct Host) type interface.U SING CFGEDIT1. Select DHCP Configuration from the IP menu.2. Select DHCP Proxy Client.3. Follow the onscreen instructions to enable the DHCP Proxy Client. Then return to the IPRouting Menu.4. Select IP Interfaces from the IP Routing Menu.5. Select Add to add a WAN or WAN (Direct Host) interface. Provide pertinent information inresponse to the prompts until you reach the DHCP Proxy Client Configuration submenu:6. Select “1”. Enter the maximum number of IP addresses that may be obtained from a DHCPserver for this interface.7. Select “2”. Enter the number of IP addresses (obtained from DHCP servers) that should beavailable at all times for remote devices on this interface.8. Select “3”. Enter the number of the LAN Port to use to reach a DHCP Server.9. Press to display the newly-configured interface, and select “Y” (yes) to confirm itsaddition to the configuration.U SING M ANAGE M ODEdhcpDisplays the current DHCP configuration values.dhcp changeDisplays the same DHCP menu as CFGEDIT, allowing you to change the current DHCPconfiguration.DHCP Proxy Client Configuration for this interface:(1) Maximum number of IP addresses that can be obtained is 0.(2) Number of IP addresses to pre-fetch is 0.(3) LAN port to reach DHCP server on is 1.Select function from above or for previous menu: