Cabletron Systems Cabletron CyberSWITCH CSX5500 User Manual

Also see for CyberSWITCH 5500: Quick start Manual

Contents

USER’S GUIDE622 CyberSWITCHtftp sessionDisplays the TFTP session information of active TFTP sessions. To get detailed information ona specific session, enter the session’s Id number when prompted. You can not display thesession information for a TFTP session that has terminated. The following screen illustrates theuse of this command.tftp statsDisplays the current TFTP related statistics. Refer to TFTP Statistics, for a list of availablestatistics and their definitions.T RACE C OMMANDSNote: For an explanation regarding the output resulting from the family of trace commands, referto the Trace Messages chapter.The following commands are used to enable and disable trace reporting information:> TFTP PUT>IP Address of the Host to receive the file( to abort)? 19.233.45.33>Enter the name of the local file to send (including the full path)( to abort)? \config\config.nei>Enter the name for the remote file (including the full path)( for same as local)? Enter the mode (BIN [binary] or ASC [ascii]) for ascii? binSending File... Please waitFile Transfer Complete...> TFTP SESSIONId Sess-Id Local file Type/Mode Bytes Xmit Retries----------------------------------------------------------1 5 temp.txt Client/Put 12752 12 6 tmp Server/Get 423 03 7 text.txt Server/Put 8481 0Select the ID of the TFTP Session to display or to cancel? 2TFTP Session ID: 6Type: ServerMode: GetLocal Address: 190.5.6.8 (UDP Port: 5001)Local File: c:\tmpRemote Address: 190.5.6.11 (UDP Port: 5011)Remote File: N/ATransfer Mode: netasciiBytes Transferred: 935Bytes Remaining: 1145723Total Retries: 0