Cabletron Systems Cabletron CyberSWITCH CSX5500 User Manual

Also see for CyberSWITCH 5500: Quick start Manual

Contents

Central Site Remote Access Switch 529SYSTEM M ESSAGESSystem Message Summary[SNMP] Authentication failure, improper access rightsThere are two possible causes for this message:• The SNMP Agent received a SetRequest PDU that contained a Community Name with an MIBaccess level of MIB GUEST or MIB USER. The MIB access level must be MIB ADMIN to per-form a SetRequest. The request was discarded.• The SNMP Agent received a PDU that contained a Community Name with an MIB access levelof MIB GUEST and an object Id that cannot be accessed with an MIB GUEST access level. Therequest was discarded.[SNMP] Authentication failure, unknown community nameThe SNMP Agent received a request PDU whose community name is not configured in theCommunity Names Table. The request was discarded.[SNMP] SNMP initialization failure - unable to allocate necessary memoryThe SNMP feature was unable to initialize because it could not obtain the necessary memory. TheSNMP feature is disabled and no SNMP request will be processed. Contact your Distributor orCustomer Support.[SNMP] SNMP initialization failure - unable to open UDP portThe SNMP feature was unable to initialize because it could not obtain the necessary UDP port. TheSNMP feature is disabled and no SNMP request will be processed. Check the configuration, andthen contact your Distributor or Customer Support.[SNMP] SNMP initialized successfullyThe SNMP Agent has been successfully initialized and is fully operational.[SNMP] Unable to obtain an SNMP Trap queue entry bufferThe SNMP Agent attempted to generate a TRAP PDU but was unsuccessful because it could notobtain necessary memory. The TRAP was not sent. Contact your Distributor or Customer Support.[SNMP] Unable to obtain an SNMP Trap queue headerThe SNMP Agent attempted to generate a TRAP PDU but was unsuccessful because it could notobtain necessary memory. The TRAP was not sent. Contact your Distributor or Customer Support.SPID FSM got unidentifiable INFO msg - Slot= Port= Ces=suffix>An unexpected information message was received from the network on the indicated line. If youare having trouble establishing calls on this line, the problem should be reported to your phonecompany.SSB: Can’t read RTC prior to i960 POSTsThe Real Time Clock became inaccessible before invoking the i960 POSTs. The RTC is used to guardagainst infinite loops while waiting for the i960 to run its POST tests. The boot process shouldcontinue; however, make note of the error message in the event of a future problem.SSB: Couldn’t read RTC during i960 POSTsThe Real Time Clock became inaccessible during the running of the i960 POSTs. The RTC is usedto guard against infinite loops while waiting for the i960 to run its POST tests. The boot processshould continue; however, make note of the error message in the event of a future problem.