Cabletron Systems Cabletron CyberSWITCH CSX5500 User Manual

Also see for CyberSWITCH 5500: Quick start Manual

Contents

USER’S GUIDE226 CyberSWITCHnetlogin changeAllows you to change the current network login configuration data. After entering thenetlogin change command, you will be prompted for the type of login configurationinformation you want to change. The prompt will resemble the CFGEDIT screen in which thisinformation was originally configured. You may change: user level security generalconfiguration, login banners, login configuration specific to RADIUS, and login configurationspecific to TACACS.NETWORK LOGIN B ANNERS BACKGROUND I NFORMATIONAllows you to customize the various system banners: login, change password, login successful andlogin unsuccessful. You may also define a “Welcome” banner and a “Message-of-the-Day” banner.You do so by creating a welcome.nei file and a motd.nei file on the system’s \configdirectory. (Refer to the Software Overview chapter for file information). The creation of these filesis optional.LOGIN CONFIGURATION S PECIFIC TO RADIUS S ERVERCONFIGURING RADIUS SERVER L OGIN I NFORMATIONU SING CFGEDIT1. Select option (3), Login Configuration Specific to RADIUS Server from the Network LoginInformation menu. If you need guidance to find this menu, refer to the instructions providedin the Network Login General Configuration configuration section. The following screen will bedisplayed:2. Selection (1) from the RADIUS Specific Device Login Menu allows you to change the passwordcontrol character:3. Selection (2) from the RADIUS Specific Device Login Menu allows you to customize theprompt order for device login. This prompt is particularly important, because the order ofprompts must be the same as the order expected by the RADIUS server. Selection (2) displaysthe following:RADIUS Specific Device Login Menu:1) Change Password Control Character is DISABLED.2) Prompt Order for Device Login.Select function from above or for previous menu: 1Enter control character used to switch from LOGIN to CHANGE PASSWORD mode.Select the control character that you wish to us by typingcaret (‘^’) followed by another character (example: ^A),or ‘0’ to disable [Default = DISABLED]?