Cabletron Systems Cabletron CyberSWITCH CSX5500 User Manual

Also see for CyberSWITCH 5500: Quick start Manual

Contents

USER’S GUIDE640 CyberSWITCHINITThe access state entered when the access is first initialized. The access has entered the LMIdialogue phase, but has not yet received an appropriate LMI STATUS message response.UPThe access state entered when the access either has no LMI, or the LMI message exchangeis confirmed.DOWNThe access state entered when the access has been lost due to layer 1 loss, or after noresponse has been received on the LMI link.# Line Ready CountThe number of times the physical link underlying the Frame Relay Access has become “ready” foruse.# Line Not Ready CountThe number of times the physical link underlying the Frame Relay Access has become unusable.# Frames ReceivedThe total number of frames received on the Frame Relay Access. This is the sum of the number offrames received on each PVC associated with this access.# Frames SentThis item refers to the total number of frames sent on the Frame Relay Access. This is the sum ofthe number of frames sent on each PVC associated with this access.# Bytes ReceivedThe total number of bytes received on the Frame Relay Access. This is the sum of the number ofbytes received on each PVC associated with this access.# Bytes SentThe total number of bytes sent on the Frame Relay Access. This is the sum of the number of bytessent on each PVC associated with this access.# Reset Rx SeqThe number of times the receive sequence variable had to be reset. This event occurs when a receivesequence number of ‘0’ is received from the network.# Reset Tx SeqThe number of times the transmit sequence variable had to be reset. This event occurs when atransmit sequence number of ‘0’ is received from the network.# Lost Rx SeqThe number of times a receive frame was lost. This event is indicated by a break in the receivesequence numbers of received frames (i.e., the receive sequence number of a particular receiveframe did not compare with the software’s expected receive sequence number).# Lost Tx SeqThe number of times a transmit frame was lost. This event is indicated by a break in the transmitsequence numbers of received frames (i.e., the transmit sequence number of a particular receiveframe did not compare with the software’s expected transmit sequence number).