Cabletron Systems Cabletron CyberSWITCH CSX5500 User Manual

Also see for CyberSWITCH 5500: Quick start Manual

Contents

USER’S GUIDE572 CyberSWITCHBaud RateIf you wish to enter a new baud rate, enter a menu selection of “B “(for Baud Rate). Continue topress B until the baud rate you desire is displayed.When you have finished making Carbon Copy configuration parameter changes, enter a menuselection of “X” to save your changes and exit the CCINSTAL program. You will be asked if youwish to update the presently running Carbon Copy. Enter “Y” for yes. Carbon Copy will then bereinitialized and you will be returned to the MSDOS prompt.USAGE I NSTRUCTIONSE STABLISHING A R EMOTE A DMINISTRATION S ESSIONWhen using the remote administration console option, Carbon Copy establishes an administrationsession with the CyberSWITCH. This section contains a brief description of establishing anadministration session using Carbon Copy.1. If you did not install the Manager software onto the administration console PC (see UpgradingSystem Software) then insert the Manager software diskette into the diskette drive on theadministration console PC.2. Set the administration console PC to the disk drive containing the Manager software (replace“drive letter” with the appropriate administration console PC drive, for example, “A” or “C”).Type: letter>:3. Set the administration console PC to the directory containing the Manager software. Type:cd \admin4. Load the Carbon Copy CCHELP program on the administration console PC. Type:cchelpWithin 3 to 10 seconds, Carbon Copy will be displayed on the screen. The screen is divided intothree sections. In the lower right hand corner is the Carbon Copy command screen. It isfunction-key driven and provides the following commands:5. Choose Call CC Device from the Carbon Copy command screen.Press: The system will prompt you for a phone number. If you are using remote access with modems,then enter a phone number. If you are directly connected with a null-modem cable, then nophone number is required; just press the enter key.6. Type: (or just if directly connected)[F1] Call CC Device[F3] Capture Screen/Session[F4] Review/Replay Captured Image[F6] Printer/LOG/DOS Control[F7] Terminal Emulation[F8] Data Link Maintenance[F10] Return to Application