Cabletron Systems Cabletron CyberSWITCH CSX5500 User Manual

Also see for CyberSWITCH 5500: Quick start Manual

Contents

USER’S GUIDE488 CyberSWITCH[AUTH] Warning code: 0010 Received unexpected authentication response code from serverA message was received from an authentication server that contained an invalid response messageidentifier.[AUTH] Warning code: 0011 An unexpected server responded to the access requestAn access response message was received from an authentication server that is not configured inthe System.[AUTH] Warning code: 0012 UDP call back processed with no data presentA message was received from an authentication server that contained zero data bytes.Bad auth result in smgrauth_aa_notify for device There was no device configured (on-node or in CSM) for the login id entered at the user-levelsecurity prompt in the terminal server interactive window. Check configuration.Bad context on SccDatInd Indicates a problem has occurred in forwarding frames from the hardware to the frame relaysoftware. The intended context for this frame is specified by the indicated context value. Contactyour Distributor or Customer Support.Bad context on X25SccDatInd A data packet has been received with an incorrect context. This indicates that the system allocationof SCC controllers is not in a consistent state. Restart the system.Bad FR Frame Size = Indicates that a frame was received with an invalid length size. Contact your Distributor orCustomer Support.Baud Rate is bpsThe Autobaud procedure has terminated and the RS232 port has been set to the specified baud rate.[BIF] Could not allocate memory for buffer queue[BIF] Initialization failedThese messages appear together in the report log. They indicate that an error occurred duringinitialization of the Bridge Local Interface (which is required for IP Host mode). If these messagesare present in the log, the system will not operate correctly. Please contact your Distributor orCustomer Support.Booting System SoftwareThe Second Stage Boot is attempting to load and execute the System software.Bootstrap came alive on DM card in slot Informational message stating that the initialization of the Digital Modem card was successful.Bootstrap came alive on WAN card in slot Informational message during a successful system initialization. Download process update forWAN card in slot . This should be reported after the “Bootstrap loaded...waiting forresponse” message for a given adapter.Bootstrap loaded on WAN card in slot , waiting for response...Informational message during a successful system initialization. The first of three messagesproviding the download process status for WAN card in slot .