Cabletron Systems Cabletron CyberSWITCH CSX5500 User Manual

Also see for CyberSWITCH 5500: Quick start Manual

Contents

Central Site Remote Access Switch 363CONFIGURING APPLE T ALK ROUTINGAppleTalk CapacitiesAPPLE TALK ROUTING STATIC R OUTES CONFIGURATION ELEMENTSA PPLET ALK NETWORK T YPEThe AppleTalk network type used by the destination network of this static route. Type can be eitherExtended Network or NonExtended Network.D ESTINATION N ETWORK RANGE/N UMBERThe remote AppleTalk network range (for Extended network) or network number (forNonExtended network) reachable through this static route entry.N EXT HOP D EVICEThe AppleTalk address of the next hop device that provides access to the destination AppleTalknetwork. If the next hop is over an unnumbered WAN link, then the device name is specified. Thename must be a valid Device table entry.N UMBER OF H OPSThe number of AppleTalk routers that are traversed in order to reach the destination AppleTalknetwork.Z ONE N AME ( S)The name of the zone(s) on the remote AppleTalk network.APPLE TALK ROUTING STATIC R OUTES B ACKGROUND INFORMATIONYou only need to configure static routing entries if you need to access a WAN network that is notdirectly connected to the system, or if you need to access a LAN network through a router that doesnot support AppleTalk RTMP. Static routes specify the AppleTalk address of the next hop routerthat provides access to this network.A PPLE T ALK C APACITIESCONFIGURING A PPLE TALK CAPACITIESU SING CFGEDIT1. Select AppleTalk Capacities from the AppleTalk Routing Menu.2. Press 1 to set the maximum number of entries for the AppleTalk Route table.3. Press 2 to set the maximum number of entries for the AppleTalk zone table.APPLE TALK CAPACITIES CONFIGURATION ELEMENTSA PPLET ALK R OUTING TABLE M AXIMUM NUMBER OF E NTRIESAllows you to set the maximum number of defined and learned routing table entries. The defaultvalue is 512. The maximum is 2,000.A PPLET ALK Z ONE T ABLE MAXIMUM N UMBER OF ENTRIESAllows you to set the maximum number of defined and learned zone table entries. The defaultvalue is 512. The maximum is 2,000.