| 
USER’S GUIDE502 CyberSWITCH(Direct Host) interface. Afterwards, configure a LAN interface and then read the WAN (DirectHost) interface.Error parsing WAN (Direct Host) interface: no LAN interface for specified name The LAN network interface associated with this WAN (Direct Host) interface is not present. UseCFGEDIT to delete the problematic WAN (Direct Host). Check configuration for the suspect LANinterface; it most likely will not be there. Add LAN interface, then reconfigure the WAN (DirectHost) interface.Error opening file \system\ethernt2.binThe LAN adapter executable file could not be opened. Check for proper software installation.Error programming adapter # ’x’ hardwareThe WAN card initialization subsystem encountered an error while attempting to program thehardware on the indicated adapter. Restart the system and review the configuration for theadapter. If the problem persists, the indicated adapter card may be faulty; contact your Distributoror Customer Support.Error reading file , section = If seen repeatedly, the above message indicates a problem with your file system. Contact yourDistributor or Customer Support.Error reading file \system\ethernet2.bin,section = The specified section of the LAN adapter executable file could not be read. Check for propersoftware installation.Error reading platform type: couldn’t open file C:\SYSTEM\PLATFORM.NEIError reading platform type: error reading C:\SYSTEM\PLATFORM.NEIError reading platform type: there is no “plat name” fieldError reading platform type: there was no “=” in the stringError reading platform type: type value is too largeError reading platform type: type was not converted to an intThere is a problem with the platform.nei file. Reinstall the system Installation/Upgrade diskettesor CD-ROM.Error reading sdconf.rec fileAn error occurred during parsing of the ACE configuration file. The file was found, but did nothave the expected format. Either repeat the download of the file from the ACE server, or reenterthe ACE database location configuration and save changes using CFGEDIT.Error requesting slot activationContact your Distributor or Customer Support.Error sending message to Call ControlThe system detected a failure while sending a message to the WAN adapter. Restart the system andreview the resource configuration. If the error persists, contact your Distributor or CustomerSupport.Event occurred on FR Access , DLCI A debug message logged to indicate Frame Relay events occurring for the indicated DLCI on theindicated Access. The event is given in both textual, event, and numeric, code, forms. |
