| 
USER’S GUIDE550 CyberSWITCHOut - DL CFG Slot= Port= Ces=The system is initializing the indicated data link.Out - DSL CFG Slot= Port=The system is initializing the indicated line.Out - init data link The system is sending a message to the network to initialize a data link on an ISDN line. The are used to report line details.Out - PROCEEDING Call Id= Slot= Port= Chans=Ces= ConnId=The system is sending a connection to the network. This is sent in response to receiving a callindication. The are included for your Distributor or Cabletron Customer Support.Recall dial tone onInformational call trace message.Received charge amount - The system has received an advice of charge from the network for the call just disconnected. Thecharge for this call is indicated in the charge amount parameter.Received unknown abnormal report value Slot= Port= Ces=suffix>Informational call trace message.Received unknown progress valueInformational call trace message.Received unknown signal valueInformational call trace message.Ringback tone onInformational call trace message.Status report progress value receivedInformational call trace message.Stutter tone onInformational call trace message.Tones offInformational call trace message.Unspecified causeInformational call trace message. This message is used to indicate additional details on the value> received in the “call progress” information message.Refer to the Cause Codes Table for moreinformation.Unspecified toneInformational call trace message. It is used to indicate additional details on the received in the “call progress” information message. The is displayed as one of thefollowing: dial, ring back, answer, call waiting, off hook warning, custom, recall dial, stutter dial,or expensive routing. |
