Cabletron Systems Cabletron CyberSWITCH CSX5500 User Manual

Also see for CyberSWITCH 5500: Quick start Manual

Contents

Central Site Remote Access Switch 351C ONFIGURING SNMPConfiguring SNMP1. Enable IP routing if you have not already done so.2. Select SNMP from the Options menu.3. Follow the onscreen instructions to enable SNMP. The following SNMP menu will then bedisplayed:4. Enter the Community Name information.a. Enter a user-defined Community Name. This is a case-sensitive string of octets used toidentify the community to which an SNMP Manager, along with the Agent(s) that itmanages, belongs. It is used to authenticate an SNMP PDU. The string “public” is a widelyused Community Name.b. Select the access level associated with the Community Name.5. Enter the SNMP trap information (optional).a. Configure IP address(es) and Community Name used in SNMP Trap PDUs.• Enter the IP address of the NMS(s) that should receive the traps. The NMS is a devicethat contains SNMP management software. A Network Manager can be any type ofcomputer that is capable of executing the necessary SNMP management software.• Select the Community Name.b. If you want authentication failure traps, follow the onscreen instructions for enablingthem.c. If you want ISDN B-channel usage traps, follow the onscreen instructions for enablingthem.d. Set the threshold value for ISDN B-channel usage traps.6. Optional: change the values of the MIB-2 system group objects.SNMP Menu:1) SNMP (Enable/Disable)2) SNMP Community Name3) SNMP Trap Information4) MIB-2 System Group ObjectsSelect function from above or for previous menu: