Cabletron Systems Cabletron CyberSWITCH CSX5500 User Manual

Also see for CyberSWITCH 5500: Quick start Manual

Contents

Central Site Remote Access Switch 571R EMOTE M ANAGEMENTCarbon CopyEnter the following command to start up the CCINSTAL program:C:\admin>ccinstalThe Carbon Copy System Parameters screen will appear. Follow the directions on the screen tochange parameter settings.After you make all parameter changes, select “X” to save the changes and exit the CCINSTALprogram. Restart the CyberSWITCH by issuing the command:start_ne.After issuing thestart_ne command, you must again login to the system.CARBON COPY C ONFIGURATION P ARAMETERS FOR M ODEM USAGEIf you wish to manage your CyberSWITCH via a modem, you will need to make changes to theCarbon Copy configuration parameters. To make these configuration changes, you must havepreviously installed your internal or external modem. You will also need a locally attachedkeyboard and monitor.To change Carbon Copy parameters on the CyberSWITCH, terminate the CyberSWITCH by typingquit. Next, enter the following command at the MSDOS prompt to change the current directoryto “ADMIN”:C:\>cd \adminEnter the following command to start up the CCINSTAL program:C:\admin>ccinstalThe Carbon Copy System Parameters screen will appear. Refer to the above section titled ChangingCARBON COPY Configuration Parameters for a sample screen. Follow the directions on the screen tochange parameter settings. The parameters that you may need to change are as follows:Modem TypeYou must change the modem type from the default of “Direct Connect” to your modem’s brandname. To make this change, enter a menu selection of “C” (for Modem Type). A list of modem typeswill be displayed. Arrow down to the type of modem you have installed. If the type of modem youhave installed is not included on the list, select Hayes Smartmodem.You will then be asked if you want to use the Modem’s default baud rate. Answer either yes or noby entering Y or N.A Comm Port Address COM1 Q Quit, changes not savedB Baud Rate 9600 X eXit, changes savedC Modem Type Direct ConnectD Keyboard Handling USA KeyboardE Display Type DefaultF Menu Colors White on BlueG Working Directory Default DirectoryH Menu Level Option Advanced1 CC Optional Configuration Parameters2 CCHelp Optional Configuration Parameters3 Call Table4 Password TableType letter for selection: