USER’S GUIDE346 CyberSWITCHc. Press to return to the IPX Device Spoofing menu. Press 2 to configure SPXWatchdog Spoofing. The following menu will be displayed:d. The screen includes default configuration values. If needed, make changes to the defaultvalues.e. Press to return to the IPX Device Spoofing menu. Press 3 to configure serializationpacket handling. The following menu will be displayed:f. The screen includes default configuration values. If needed, make changes to the defaultvalues.g. Press to return to the IPX Device Spoofing menu. Press 4 to configure messagepacket handling. The following menu will be displayed:h. The screen includes default configuration values. If needed, make changes to the defaultvalues.R EMOTE LAN D EVICESRemote LAN devices are configured in a slightly different way than WAN devices. Since theremote device is a bridge and not an IPX router, the IPX options for Remote LAN devices areconfigured under the bridge-level options, as follows:U SING CFGEDIT1. Select Security from the main menu.2. Select Device Level Databases from the security menu.Device Level SPX Watchdog Spoofing Menu:1) Default Handling is Discard2) Handling while the connection is up is Forward3) Handling for the special period after disconnecting is Spoof4) Special period of time after disconnecting is 120 MinutesSelect function from above or for previous menu:Serialization Packet Handling:1) Always Discard2) Forward only when the connection is up3) Always ForwardCurrent Serialization Packet Handling is "Forward only when the connection is up".Select function from above or for previous menu: 1Message Packet Handling:1) Always Discard2) Forward only when the connection is up3) Always ForwardCurrent Message Packet Handling is "Forward only when the connection is up".Select function from above or for previous menu:
