Cabletron Systems Cabletron CyberSWITCH CSX5500 User Manual

Also see for CyberSWITCH 5500: Quick start Manual

Contents

Central Site Remote Access Switch 485SYSTEM M ESSAGESSystem Message Summary[AUTH] ACE Error receiving server log message acknowledgment.A client syntax error occurred during an authentication attempt via ACE. The server did notrespond to the logging of the message. Make sure the ACE server configuration is accurate.[AUTH] ACE LOGIN rejected user: The remote Authentication server rejected the named user. This indicates that one of the followinghas occurred:1. The is not in the remote Authentication server’s database.2. The is entered incorrectly in the remote Authentication server’s database.[AUTH] ACE Node verification received; Client initialized.The CyberSWITCH ACE client was in an initialized state. Node verification was received from theserver and the initialization cycle is complete.[AUTH] ACE No server configured for designated database location.ACE is configured as a database location for security authentication. Either no ACE server has beenconfigured or an error occurred when parsing the ACE server configuration.[AUTH] RADIUS CHAP rejected for device: The remote Authentication server rejected the CHAP mode authentication request for the indicateddevice. This usually indicates that one of the following has occurred:1. The is not in the remote Authentication server’s database.2. The device’s CHAP response was not calculated properly.3. The device’s SECRET does not match the secret in the RADIUS server’s database.4. The RADIUS server’s database entry for this device contains errors.[AUTH] RADIUS HDLC BRIDGE rejected bridge address: The remote Authentication server rejected the bridge address. This indicates that one of thefollowing has occurred:1. The is not in the remote Authentication server’s database.2. The is entered incorrectly in the remote Authentication server’s database.[AUTH] RADIUS INTERFACE LOOKUP rejected name The remote Authentication server route lookup feature rejected the interface name. This indicatesthat one of the following has occurred:1. The < interface name> is not in the remote Authentication server’s database.2. The < interface name > is entered incorrectly in the remote Authentication server’s database.