Signal DescriptionMPC5566 Microcontroller Reference Manual, Rev. 2Freescale Semiconductor 2-312.3.8.6 Analog Input / Differential Analog InputAN[5]_DAN2–AN[5] is a single-ended analog input to the two on-chip ADCs. DAN2– is the negative terminal of thedifferential analog input DAN2 (DAN2+ to DAN2–).2.3.8.7 Analog Input / Differential Analog InputAN[6]_DAN3+AN[6] is a single-ended analog input to the two on-chip ADCs. DAN3+ is the positive terminal of thedifferential analog input DAN3 (DAN3+ to DAN3–).2.3.8.8 Analog Input / Differential Analog InputAN[7]_DAN3–AN[7] is a single-ended analog input to the two on-chip ADCs. DAN3– is the negative terminal of thedifferential analog input DAN3 (DAN3+ to DAN3–).2.3.8.9 Analog Input / Multiplexed Analog InputAN[8]_ANWAN[8] is an analog input pin. ANW is an analog input in external multiplexed mode.2.3.8.10 Analog Input / Multiplexed Analog InputAN[9]_ANXAN[9] is an analog input pin. ANX is an analog input in external multiplexed mode.2.3.8.11 Analog Input / Multiplexed Analog InputAN[10]_ANYAN[10] is an analog input pin. ANY is an analog input in external multiplexed mode.2.3.8.12 Analog Input / Multiplexed Analog InputAN[11]_ANZAN[11] is an analog input pin. ANZ is an analog input in external multiplexed mode.NOTEAttempts to convert the input voltage applied to AN[12], AN[13], AN[14],and AN[15] while a non-eQADC function is selected causes an undefinedconversion result.