User Constant Tables5- 81 Factory Settings that Change with the Control Method (A1-02)The factory settings of the following user constants will change if the control method (A1-02) is changed.* 1. For Inverters with a capacity of 55 kW or more, the factory setting is 2.00 for open-loop vector control and 0.05 for flux vector control.* 2. When C6-01 = 0, the upper limit is 150.0.* 3. Settings vary as shown in the following tables depending on the Inverter capacity and E1-03.* 4. The settings shown are for 200 V Class Inverters. The values will double for 400 V Class Inverters.* 5. When C6-01 = 1, the upper limit is 400.0.Con-stantNumberName Setting Range UnitFactory SettingV/f Con-trolA1-02=0V/F withPGA1-02=1OpenLoopVectorA1-02=2FluxVectorA1-02=3b3-01 Speed search selection 0 to 3 1 2 3 2 -b3-02 Speed search operating current 0 to 200 1% 120 - 100 -b8-02 Energy-saving gain 0.0 to 10.0 0.1 - - 0.7 1.0b8-03 Energy-saving filter time constant 0.00 to 10.00 0.01 s - - 0.50 *1 0.01 *1C3-01 Slip compensation gain 0.0 to 2.5 0.1 0.0 - 1.0 1.0C3-02 Slip compensation primary delay timeconstant 0 to 10000 1 ms 2000 - 200 -C4-02 Torque compensation primary delay timeconstant 0 to 10000 1 ms 200 200 20 -C5-01 ASR proportional (P) gain 1 0 to 300.00 0.01 - 0.20 - 20.00C5-02 ASR integral (I) time 1 0.000 to 10.000 0.001 s - 0.200 - 0.500C5-03 ASR proportional (P) gain 2 0.00 to 300.00 0.01 - 0.02 - 20.00C5-04 ASR integral (I) time 2 0.000 to 10.000 0.001 s - 0.050 - 0.500E1-04E3-02 Max. output frequency (FMAX) 40.0 to 400.0 *20.1 Hz 60.0*360.0*3 60.0 60.040.0 to 300.0 *5E1-05E3-03 Max. voltage (VMAX) *4 0.0 to 255.0(0.0 to 510.0) 0.1 V 200.0*3200.0*3 200.0 200.0E1-06E3-04 Base frequency (FA) 0.0 to 400.0 *20.1 Hz 60.0*360.0*3 60.0 60.00.0 to 300.0 *5E1-07E3-05 Mid. output frequency (FB) 0.0 to 400.0 *20.1 Hz 3.0*33.0*3 3.0 0.00.0 to 300.0 *5E1-08E3-06 Mid. output frequency voltage (VC)*4 0.0 to 255.0(0.0 to 510.0) 0.1 V 15.0*315.0*3 11.0 0.0E1-09E3-07 Min. output frequency (FMIN) 0.0 to 400.0 *20.1 Hz 1.5*31.5*3 0.5 0.00.0 to 300.0 *5E1-10E3-08 Min. output frequency voltage (VMIN)*4 0.0 to 255.0(0.0 to 510.0) 0.1 V 9.0*39.0*3 2.0 0.0F1-09 Overspeed detection delay time 0.0 to 2.0 0.1 s - 1.0 - 0.0L8-18 Soft CLA selection 0, 1 1 1 1 1 0
