3 -10 Verify ModeVerify mode is used to display any constants that have been changed from their default settings in a program-ming mode or by autotuning. “None” will be displayed if no settings have been changed.Of the environment mode settings, only A1-02 will be displayed if it has been changed. Other environmentmodes settings will not be displayed even if they have been changed from their default settings.Even in verify mode, the same procedures can be used to change settings as are used in the programmingmodes. Use the Increment, Decrement, and Shift/RESET Keys to change the frequency. The user constant willbe written and the monitor display will be returned to when the DATA/ENTER Key is pressed after changingthe setting.Example OperationsAn example of key operations is given below for when the following settings have been changed from theirdefault settings: b1-01 (Reference Selection), C1-01 (Acceleration Time 1), E1-01 (Input Voltage Setting), andE2-01 (Motor Rated Current).Fig 3.7 Operations in Verify ModeDATAENTERDRIVE QUICK VERIFYA.TUNEADVDRIVE QUICK VERIFYA.TUNEADVMonitor DisplayMENUSetting DisplayVerify ModeMode Selection DisplayAcceleration time 1Input voltage settingMotor rated currentDRIVE QUICK VERIFYA.TUNEADVDATAENTER DATAENTERDATAENTERDATAENTERDATAENTERDATAENTERDATAENTERDATAENTERESCESCESCESCESCESCESCESCAcceleration time 1Input voltage settingMotor rated currentFrequency referenceselectionFrequency referenceselection
